Windows 8 Support

From SME Server
Jump to navigationJump to search
PythonIcon.png Skill level: medium
The instructions on this page require a basic knowledge of linux.


Background

Windows 8 was released in december 2012. Due to changes in the way that trust relationships are established with domain controllers, older versions of Samba (need at least 3.6.6) do not allow Windows 8 clients to log in once joined to a domain. see bugzilla:7172

Join a SME Server 8.0 Domain with Win8

Previously you needed to edit your Win8 registry to facilitate the joining of a SME Server Domain, however this can more easily be achieved by importing win8samba.reg fix by using either a usb key or by the network with http.

  • Save the Win8 registry patch (win8samba.reg) from https://your-server-ip/server-resources/regedit/ with your favourite web browser
  • On your windows desktop, start "regedit" from the search menu in the top right corner and import the win8samba.reg
  • Set your domain instead of your workgroup. Add the client machine to the domain as normal. Go to the Top right corner, select Parameters and then PC Information
  • When asked on your Windows PC use the 'admin' username and your SME Server admins password.
  • You have to reboot your computer to reach the domain

Slow login with win8 to sme8 domain

With certain networks you may have an issue with a slow login to the SME Server domain due to a timeout issue on the network. In this case you should apply the following commands to your SME Server as can be found at bugzilla:7332 The version of package needed e-smith-samba-2.2.0-54.el5.sme is in smeupdates-testing but will shortly be by default in smeupdates so in the first instance verify your package version

rpm -qa e-smith-samba
e-smith-samba-2.2.0-54.el5.sme

You need at least this version as above, otherwise try this

yum update --enablerepo=smeupdates-testing e-smith-samba
signal-event post-upgrade; signal-event reboot

Then you must add a new configuration setting to you smb internal database

config setprop smb WaitForNetwork disabled
signal-event console-save 

This is what you need to find in your server-ressources

cat /home/e-smith/files/server-resources/regedit/win7samba.reg 
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanManWorkstation\Parameters]
"DNSNameResolutionRequired"=dword:00000000
"DomainCompatibilityMode"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System]
"WaitForNetwork"=dword:00000000

After this you follow the usual way to add a Win7 to the SME DOMAIN, as above Windows_8_Support#Join_a_SME_Server_8.0_Domain_with_Win8