Difference between revisions of "VMware Tools"

From SME Server
Jump to navigationJump to search
(use baseURL /5.5latest/ instead of /5.5/ to allow 'yum --enablerepo=vmware-tools update' to include vmware tools)
(Add link to wikipedia page on PAE (Physical Address Extensions))
Line 197: Line 197:
 
  expand-template /etc/yum.smerepos.d/sme-base.repo
 
  expand-template /etc/yum.smerepos.d/sme-base.repo
  
check for PAE vs non-PAE kernel
+
check for [http://en.wikipedia.org/wiki/Physical_Address_Extension PAE vs non-PAE] kernel
 
  uname -r
 
  uname -r
  

Revision as of 13:21, 1 October 2014

Purpose

This document describes the installation of the VMware Tools on a SME guest running on a VMware Server or an ESX Server.

Mount the installation CDROM image

This is not required on ESXi 4!

ESX 3.5

Start the Virtual Infrastructure Client. Make sure that you have added a virtual CDROM device to the SME VM. Power on the SME VM.

Right click in the SME VM and select 'Install/Upgrade VMware Tools'.

VMware Server

Start the VMware Server Console. Make sure that you have added a virtual CDROM device to the SME VM. Power on the SME VM.

Select the SME VM, then select menu 'VM'=>'Install VMware Tools...'.

Installation

SME Server 8 and 7.4 Guests on VMWare Server 2

Log into SME as user root on the local console.

mkdir -p /mnt/cdrom 
mount /dev/cdrom /mnt/cdrom
rpm -ivh /mnt/cdrom/VMwareTools*i386.rpm
vmware-config-tools.pl
ln -fs /etc/rc.d/init.d/vmware-tools /etc/rc7.d/S90vmware-tools 
reboot
Important.png Note:
After a SME Server update you must re-run vmware-config-tools.pl


SME Server 7.3 and 7.4 Guests on ESXi 3.5

Log into SME as user root on the local console.

mkdir -p /mnt/cdrom 
mount /dev/cdrom /mnt/cdrom
rpm -ivh /mnt/cdrom/VMwareTools*i386.rpm

Edit the file /etc/rc.d/init.d/vmware-tools and delete the following 2 lines:

939: vmware_exec 'Guest vmxnet fast network device:' vmware_stop_vmxnet
940: exitcode=$(($exitcode + $?))

Edit the file /usr/bin/vmware-config-tools.pl and search for the following line

$gSystem{'version_integer'} != kernel_version_integer(2, 4, 9)) {

and change it to

$gSystem{'version_integer'} != kernel_version_integer(2, 6, 9)) {

On ESXi 3.5.0 Build-123629 it is line #3565, on ESXi 3.5.0 Build-10271 it is line #3545.

Run the configuration script

vmware-config-tools.pl

and link the start script to run level 7

ln -fs /etc/rc.d/init.d/vmware-tools /etc/rc7.d/S90vmware-tools 
reboot
Important.png Note:
After a SME Server update you must re-run vmware-config-tools.pl


SME Server 7.4 Guest on ESXi 4.0

Download the required packages

wget http://packages.vmware.com/tools/esx/4.0/rhel4/i686/vmware-open-vm-tools-kmod-8.0.0-164009.165940.el4.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0/rhel4/i686/vmware-open-vm-tools-common-8.0.0-164009.165940.el4.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0/rhel4/i686/vmware-open-vm-tools-nox-8.0.0-164009.165940.el4.i686.rpm

Install the packages and dependencies

/usr/bin/yum localinstall \
 vmware-open-vm-tools-kmod-8.0.0-164009.165940.el4.i686.rpm \
 vmware-open-vm-tools-common-8.0.0-164009.165940.el4.i686.rpm \
 vmware-open-vm-tools-nox-8.0.0-164009.165940.el4.i686.rpm

Link the start script to run level 7

ln -fs /etc/rc.d/init.d/vmware-tools /etc/rc7.d/S90vmware-tools

Start the service

service vmware-tools start

SME Server 7.4 Guest on ESXi 4.0 Update 1

Download the required packages

wget http://packages.vmware.com/tools/esx/4.0u1/rhel4/i686/vmware-open-vm-tools-kmod-8.0.2-208167.el4.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0u1/rhel4/i686/vmware-open-vm-tools-common-8.0.2-208167.el4.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0u1/rhel4/i686/vmware-open-vm-tools-nox-8.0.2-208167.el4.i686.rpm

Install the packages and dependencies

/usr/bin/yum localinstall \
 vmware-open-vm-tools-kmod-8.0.2-208167.el4.i686.rpm \
 vmware-open-vm-tools-common-8.0.2-208167.el4.i686.rpm \
 vmware-open-vm-tools-nox-8.0.2-208167.el4.i686.rpm

Link the start script to run level 7

ln -fs /etc/rc.d/init.d/vmware-tools /etc/rc7.d/S90vmware-tools

Start the service

service vmware-tools start

SME Server 8.0 Guest on ESXi 4.0 Update 1

Download the required packages

wget http://packages.vmware.com/tools/esx/4.0u1/rhel5/i686/vmware-open-vm-tools-kmod-8.0.2-208167.el5.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0u1/rhel5/i686/vmware-open-vm-tools-common-8.0.2-208167.el5.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0u1/rhel5/i686/vmware-open-vm-tools-nox-8.0.2-208167.el5.i686.rpm

Install the packages and dependencies

/usr/bin/yum localinstall \
 vmware-open-vm-tools-kmod-8.0.2-208167.el5.i686.rpm \
 vmware-open-vm-tools-common-8.0.2-208167.el5.i686.rpm \
 vmware-open-vm-tools-nox-8.0.2-208167.el5.i686.rpm

Link the start script to run level 7

ln -fs /etc/rc.d/init.d/vmware-tools /etc/rc7.d/S90vmware-tools

Start the service

service vmware-tools start

SME Server 8.0 Guest on ESXi 5.0

Install the relevant repository

db yum_repositories set vmware-tools repository \
 Name 'VMWare Tools' \
 BaseURL 'http://packages.vmware.com/tools/esx/5.0/rhel5/$basearch' \
 EnableGroups no \
 GPGCheck yes \
 GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
 Visible no \
 status disabled

Make the relevant changes stick

signal-event yum-modify
Important.png Note:
At this point I could not immediately call "yum install ..." for some reason. Just wait a bit if this happens.


Import the VMWare RSA key (not sure if this could be done via the db mechanism)

rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub

Update server to latest packages

yum update

Now, installing VMWare tools involves knowing which type of kernel you have, PAE or non-PAE. To check, do a

uname -r

If the output of the command mentioned above contains PAE, then you have a PAE kernel and the following command should be used to install VMWare Tools

yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox

Otherwise, you don't have a PAE kernel and the relevant command to install VMWare Tools is

yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox

Link the start script to run level 7

ln -s /etc/init.d/vmware-tools-services /etc/rc7.d/S90vmware-tools-services

Start the service

/etc/init.d/vmware-tools-services start

Everything should be ok now, just restart the machine. If you by any chance wish to use the vmxnet2 adapter instead of the lance, then shutdown the VM, delete the "Flexible"/"Lance" network adapter and add "vmxnet2" in its place. Start the VM. If all goes ok, you'll now have the improved vmxnet NIC.

SME Server 8.0 Guest on ESXi 5.0 Update 1

Install the relevant repository

db yum_repositories set vmware-tools repository \
 Name 'VMWare Tools' \
 BaseURL 'http://packages.vmware.com/tools/esx/5.0u1/rhel5/$basearch' \
 EnableGroups no \
 GPGCheck yes \
 GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
 Visible no \
 status disabled

Make the relevant changes stick

signal-event yum-modify
Important.png Note:
At this point I could not immediately call "yum install ..." for some reason. Just wait a bit if this happens.


Import the VMWare RSA key (not sure if this could be done via the db mechanism)

rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub

Update server to latest packages

yum update

Now, installing VMWare tools involves knowing which type of kernel you have, PAE or non-PAE. To check, do a

uname -r

If the output of the command mentioned above contains PAE, then you have a PAE kernel and the following command should be used to install VMWare Tools

yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox

Otherwise, you don't have a PAE kernel and the relevant command to install VMWare Tools is

yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox

Link the start script to run level 7

ln -s /etc/init.d/vmware-tools-services /etc/rc7.d/S90vmware-tools-services

Start the service

/etc/init.d/vmware-tools-services start

Everything should be ok now, just restart the machine. If you by any chance wish to use the vmxnet2 adapter instead of the lance, then shutdown the VM, delete the "Flexible"/"Lance" network adapter and add "vmxnet2" in its place. Start the VM. If all goes ok, you'll now have the improved vmxnet NIC.

SME Server 9 Alpha3 Guest on ESXi 5.1

Install repo key

rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub

create yum repo

db yum_repositories set vmware-tools repository \
Name 'VMWare Tools' \
BaseURL 'http://packages.vmware.com/tools/esx/5.1/rhel6/$basearch' \
EnableGroups no \
GPGCheck yes \
GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
Visible no \
status disabled

Update yum.conf

expand-template /etc/yum.smerepos.d/sme-base.repo

check for PAE vs non-PAE kernel

uname -r

Install NON-PAE tools if "PAE" is not contained in the output from "uname -a"

uname -a |grep PAE || yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox

Install PAE tools if "PAE" is contained in the output from "uname -a"

 uname -a |grep PAE && yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox

There was no action required to cause the vmware tools to start at boot. Verify tools are running with

/etc/vmware-tools/init/vmware-tools-services status

SME Server 9 Guest on ESXi 5.5

Install repo key

rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub

create yum repo

db yum_repositories set vmware-tools repository \
Name 'VMWare Tools' \
BaseURL 'http://packages.vmware.com/tools/esx/5.5latest/rhel6/$basearch' \
EnableGroups no \
GPGCheck yes \
GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
Visible no \
status disabled

Update yum.conf

expand-template /etc/yum.smerepos.d/sme-base.repo

check for PAE vs non-PAE kernel

uname -r

Install NON-PAE tools if "PAE" is not contained in the output from "uname -a"

uname -a |grep PAE || yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox

Install PAE tools if "PAE" is contained in the output from "uname -a"

 uname -a |grep PAE && yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox

There was no action required to cause the vmware tools to start at boot. Verify tools are running with

/etc/vmware-tools/init/vmware-tools-services status