Line 3: |
Line 3: |
| | | |
| ====Standard configuration==== | | ====Standard configuration==== |
− | Obtain your configuration values <br />
| + | If using USB just enable nut |
| + | config setprop nut status enabled |
| + | |
| + | If using a serial port you have to set a Model |
| Find your model here http://www.networkupstools.org/compat/stable.html <br /> | | Find your model here http://www.networkupstools.org/compat/stable.html <br /> |
| Type is only used if your model is genericups <br /> | | Type is only used if your model is genericups <br /> |
− | note. /dev/ttyS0 = com1,
| |
− | see nut [http://www.networkupstools.org/faq/ FAQ] if using USB <br />
| |
| | | |
− | set configuration values
| |
| config setprop nut Device /dev/ttyS0 | | config setprop nut Device /dev/ttyS0 |
| config setprop nut Model apcsmart | | config setprop nut Model apcsmart |
Line 20: |
Line 20: |
| apply changes and restart server | | apply changes and restart server |
| signal-event post-upgrade ; signal-event reboot | | signal-event post-upgrade ; signal-event reboot |
| + | |
| + | alternatively |
| + | expand-template /etc/sysconfig/ups |
| + | expand-template /etc/ups/ups.conf |
| + | expand-template /etc/ups/upssched.conf |
| + | expand-template /etc/ups/upsmon.conf |
| + | expand-template /etc/ups/upsd.users |
| + | expand-template /etc/ups/upsd.conf |
| + | upsd |
| + | upsmon |
| | | |
| confirm server is communicating with UPS | | confirm server is communicating with UPS |