Talk:Client Authentication:Ubuntu

Have you considered using LDAP against sme8, may or may not be simpler, at least you wouldn't be using winbind.

Snoble 23:28, 15 March 2010 (UTC)

it could be interesting but how? any hint? thank you

Stefano 23:56, 30 August 2010

Yes, it'd be interesting, but I think we need to apply a patch so that users have the posixAccount objectClass (needed to store the UidNumber). See this bug: http://bugs.contribs.org/show_bug.cgi?id=6074 I've posted a patch, and I'm waiting for someone to review it.

Daniel B. 08:30, 31 August 2010

Good work, thanks. Just some minor edits for consistency of naming of SME Server, See: http://wiki.contribs.org/Help:Wiki_Manual_of_Style. Terry Fage (talk) 14:48, 17 February 2013 (MST)

Made some minor chages where sudo is required.

Note that you need to set the hostname in /etc/hostname and update /etc/hosts to match the username ot it will create a new machine account in /db/accounts and will give you an incorrect /home folder

Also found that the shares were mounted in /home/user/share

John Crisp

	Work in Progress:
	relayer has marked this page as a Work in Progress. The contents off this page may be in flux, please have a look at this page history the to see list of changes.

Authors

Original howto by Nash Consultancy

Revised by David Harper

Second revision by the Wiki amd Docs Team

Ubuntu 12.04 LTS Authentication

Introduction

The following details the setup of Ubuntu 12.04 LTS (Precise Pangolin) as a desktop to authenticate users against SME Server 8.0 using Samba and Winbind. It assumes login is via Ubuntu's standard GDM login screen.

Ubuntu 12.04 is a long term service release, and will be supported on the desktop until April 2017.

Install Ubuntu

• Download the Ubuntu .iso and install.

	Tip:
	When prompted for a user name to log in with, give a non-SME Server user such as 'localuser', as this first user effectively becomes a local user with sudo root access. Make sure you set the 'Name of this Computer' to something less than 15 characters.

• Complete install, login and apply all updates.

	Note:
	For VirtualBox VM installation only, install the 'Guest Additions'. Mount the media and run autorun.sh. For VMware, install the VMware Tools. Untar the installer and run vmware-install-tools.pl

Additional Packages

Use the 'Software Manager' to install additional packages

auth-client-config
winbind
libpam-mount
cifs-utils

Optionally, you can use the command line:

sudo apt-get install auth-client-config winbind libpam-mount cifs-utils

Samba Modifications

• Open an 'Applications - Accessories - Terminal' cli and change to root privileges

sudo su

• Open and edit /etc/samba/smb.conf. Find the relevant lines and alter them or uncomment them as below. Some lines may not exist and may need to be added.

Replace <WORKGROUP> below with the 'Windows workgroup' name of your SME Server. Replace <ip of sme server> below with the internal network ip address of your SME Server.

workgroup = <WORKGROUP>
wins server = <ip of sme server>
name resolve order = wins host lmhosts bcast
security = domain
socket options = TCP_NODELAY
idmap config * : backend = tdb
idmap config * : range = 10001-20000
idmap config DOMAIN : backend = rid
idmap config DOMAIN : range = 10000-20000
idmap config DOMAIN : base_rid = 0
template shell = /bin/bash
template homedir = /home/%D/%U
winbind enum users = yes
winbind enum groups = yes
winbind cache time = 10
winbind use default domain = yes

• To check validation of smb.conf, run

testparm

• If all OK, then run

net rpc join -D <WORKGROUP> -U admin

(I had to use sudo it this or you get /var/lib/secrets.tdb not found)

Enter the admin password for the SME Server when prompted and you should get a message,

Joined domain <WORKGROUP>

• Restart the machine to apply the changes.
• Login as the local user, open a Terminal cli and 'sudo su' again
• The following commands should now list users, groups and available shares respectively from the SME Server

wbinfo -u
wbinfo -g
smbtree

Authentication Modifications

	Warning:
	Altering the pam system authentication files can seriously effect your ability to login in to the system. Take a backup of the /etc/pam.d directory and /etc/nsswitch.conf. Have a live CD available to give access and re-apply the backup files if you make a mistake and/or get locked out

• Open and edit /etc/nsswitch.conf and find the hosts: line. Change it to

hosts: files dns wins

• Change to the auth-client-config tool profile directory

cd /etc/auth-client-config/profile.d

• Create and edit a new file called acc-sme, and enter

[sme]
nss_group=group:        compat winbind
nss_netgroup=netgroup:  nis
nss_passwd=passwd:      compat winbind
nss_shadow=shadow:      compat
pam_account=account  [success=2 new_authtok_reqd=done default=ignore]  pam_winbind.so
            account  [success=1 default=ignore]                        pam_unix.so	use_first_pass	use_authtok
            account  requisite                                         pam_deny.so
            account  required                                          pam_permit.so
pam_auth=auth	[success=2 default=ignore]  pam_winbind.so	
         auth	[success=1 default=ignore]  pam_unix.so       nullok_secure  use_first_pass  use_authtok
         auth	requisite	            pam_deny.so
         auth	required		    pam_permit.so
         auth	required		    pam_securetty.so
         auth	optional		    pam_mount.so      enable_pam_password
pam_password=password	[success=2 default=ignore]  pam_unix.so     obscure sha512
             password	[success=1 default=ignore]  pam_winbind.so  use_first_pass  md5  use_authtok
             password	requisite		    pam_deny.so
             password	required		    pam_permit.so
             password	optional	            pam_gnome_keyring.so
pam_session=session  [default=1]  pam_permit.so
            session  requisite    pam_deny.so
            session  required     pam_permit.so
            session  optional     pam_winbind.so
            session  required     pam_unix.so 
            session  required     pam_mkhomedir.so	skel=/etc/skel	umask=0022
            session  optional     pam_mount.so	        enable_pam_password
            session  optional     pam_ck_connector.so  nox11

	Tip:
	You can use auth-client-config -S > acc-sme to create the file first, containing the current pam files configuration, and then just modify

(This did not work for me even as sudo. Manually created the file with touch sme-acc and then edited)

• Save the file. Apply the pam authorisation changes

auth-client-config -a -p sme

Modify Login Screen

The default login screen for Ubuntu 12.04 LTS does not give the option to select “Other” users. This is required if we are to authenticate against SME Server users. To enable this option edit /etc/lightdm/lightdm.conf and add the following line

greeter-show-manual-login = true

Automount User Home Directories at Login

cd /etc/security

• Open and edit pam_mount.conf.xml file. Find the 'Volume Definitions' section. Add a volume line below the header

<!-- Volume Definitions --> 
<volume fstype="cifs" server="<SMESERVER>" path="homes" mountpoint="~/nethome" options="nosuid,nodev" />

• Replace <SMESERVER> above with the samba name of your SME Server. This will mount the users 'home' directory from SME Server into a directory called 'nethome' in their local home directory.

Automount Ibays at Login

• Edit /etc/security/pam_mount.conf.xml and add a line below the header

<!-- Volume Definitions --> 
<volume sgrp="<GROUPNAME>" fstype="cifs" server="<SMESERVER>" path="<IBAYNAME>" mountpoint="~/<IBAYNAME>" options="user=%(DOMAIN_USER),setuids,acl" />

• Replace <SMESERVER> with the samba name of your SME server, <IBAYNAME> with the ibay name, <GROUPNAME> with the description of the ibay owner group. The description can be recovered with

wbinfo -g

	Note:
	The sgrp param is optional. If used, ibay will be mounted only if %(DOMAIN_USER) is a member of ibay's owner group

Give Domain Admins local admin rights

• Edit /etc/sudoers and add the following line:

# Allow "Domain Admins" from the SME Server domain to run all commands
%<WORKGROUP>\\Domain\ Admins  ALL=(ALL) ALL

• Replace <WORKGROUP> with your SME Server's Windows workgroup name.

Login and Test

• Exit the Terminal cli
• Reboot the machine.
• Login as a valid SME Server user on your system, just giving username and password. No need for DOMAIN\user as samba configured above to use the default Windows Workgroup
• Authentication against SME Server should proceed and the user log in. A home directory on the local machine should be created as /home/DOMAIN/user, and a sub directory to that called 'nethome' mounted to the users home directory on the SME Server.

Login screen security

The list of available users shown at the login screen is cleared after each reboot. Once you have confirmed that everything is working you can, however, optionally configure the graphical login screen to hide the names of both local users and SME Server users who have recently logged in. This won't stop any serious attempt to break into a machine but is roughly equivalent to similar options available with the Windows XP login screen. Edit /etc/lightdm/lightdm.conf and add the following line

greeter-hide-users=true

---