Fowarding syslog stream tot a remote host
Create the following a custom template directory:
mkdir -p /etc/e-smith/templates-custom/etc/syslog.conf
and copy the existing template fragments to this new custom template directory:
/etc/e-smith/templates/etc/syslog.conf/auth /etc/e-smith/templates/etc/syslog.conf/authpriv /etc/e-smith/templates/etc/syslog.conf/daemon /etc/e-smith/templates/etc/syslog.conf/kern /etc/e-smith/templates/etc/syslog.conf/syslog
you may copy any available template fragment for which you would like to send the syslog messages to the remote host.
then modify the the copied template fragment in the custom dirctory as follows:
where 192.168.1.170 is the IP address of the remote host. Obviously this is an example and you should use the IP address of your real syslog collecting server.
The new template needs to be expanded by:
And restart syslog:
service syslog condrestart
From here on, all syslog messages will be send to the remote host over port 514
Forwarding syslog stream to a collector
Syslog information can also be send to a special agent on a remote host (e.g. Splunk, Logrythm)
Syslog forwarding for Splunk
If you would like to be able to collect and monitor your SME server using SYSLOG, the following mini Howto shows how you can enable your SME to Forward Event Log information to an external SYSLOG Collector like SPLUNK. Please note that this Howto assumes you have a running SPLUNK server (v6.xx) in your infrastructure with ports 514 and 9997 enabled. Visit http://www.splunk.com for more product information and installation documentation.
1. Download SPLUNK Universal Forwarder from: http://www.splunk.com/download?r=header or direct download (you will need to establish a SPLUNK account, if you don't already have one -- you cannot WGET this file): http://www.splunk.com/page/download_track?file=6.1.1/splunk/linux/splunk-6.1.1-207789-linux-2.6-x86_64.rpm&platform=Linux&architecture=x86_64&version=6.1.1&product=splunk&typed=release&name=linux_installer&d=pro
2. Upload the SPLUNK .rpm package to your SME server via SFTP/FTP to /tmp
3. ssh to your SME server
4. cd /tmp
5. rpm -ivh splunk-6.1.1-207789-linux-2.6-x86_64.rpm (latest version as of this post)
6. cd /opt/splunkforwarder/bin
7. Enable boot-start init script: ./splunk enable boot-start
8. Start Splunk Forwarder service: ./splunk start
9. Enable Forwarding: ./splunk add forward-server <splunk-server-ip-or-hostname.domain>:9997
10. At this point you can test to make sure the connection between SME and SPLUNK is working by running the command: ./splunk list forwarder
Next you will need to add which logs files will be forwarded and processed by SPLUNK. Run the following commands for SME logs (Steps 11-17).
11. ./splunk add monitor /var/log/messages -index main -sourcetype syslog
12. ./splunk add monitor /var/log/secure -index main -sourcetype syslog
13. ./splunk add monitor /var/log/cron -index main -sourcetype syslog
14. ./splunk add monitor /var/log/maillog -index main -sourcetype syslog
15. ./splunk add monitor /var/log/spooler -index main -sourcetype syslog
16. ./splunk add monitor /var/log/boot.log -index main -sourcetype syslog
17. ./splunk add monitor /var/log/yum/yum.log -index main -sourcetype syslog
18. Restart to the SPLUNK server to commit all changes: ./splunk restart
Within a few moments if you should begin to see SYSLOG updates to your SPLUNK server from SME over port 9997.
If you would like to seperate the data being collected from SME on your SPLUNK server, you can create a new index, ie: SME and replace the commands on lines 11-17 with:
./splunk add monitor /<pathtologs>/ -index sme -sourcetype syslog
then you can create a report/filter or dashboard on the keyword "SME"
Cleaning Data Indexes
If you need to clear data that is being collected by SPLUNK from SME you can run the following command:
on your SPLUNK server: splunk clean eventdata -index <indexname>
(where <indexname> is main, or sme, etc.) (or command: splunk clean eventdata <indexname>)