Difference between revisions of "SME Server:Documentation:Administration Manual:Chapter6"

From SME Server
Jump to navigationJump to search
Line 62: Line 62:
 
==== Option 8: Perform backup to USB device ====
 
==== Option 8: Perform backup to USB device ====
 
Attach a USB Device and follow the prompts.
 
Attach a USB Device and follow the prompts.
 +
 +
Custom db setting for the compression level of the *.tgz file and hence the speed of the backup can be set from -9 to -1, default is -9.
 +
 +
Regulate the speed of compression using the specified digit n, where `-1' indicates the fastest compression method (less compression) and or `-9' indicates the slowest compression method (optimal compression). The default compression level is `-9' (that is, biased towards high compression at expense of speed).
 +
 +
Console USB Backup, allow user setting of compression level
 +
db configuration setprop backupconsole CompressionLevel=-6
  
 
To restore this type of USB Backup, perform a clean install and when prompted if you wish to restore attach the USB Drive.
 
To restore this type of USB Backup, perform a clean install and when prompted if you wish to restore attach the USB Drive.

Revision as of 11:43, 10 July 2013


The Server Console

When installing a new server or wanting to reconfigure an existing one, from the login prompt enter the username "admin" using the "root" password, the opening screen of the SME Server server console will appear:

021.png


Information.png Tip:
If logged in as root, at the command prompt enter the command "console", you will see the server console screen above.



Important.png Note:
Any time that you login to your system as the "admin" user you will see the server console. This is true even when connecting to the server remotely using a tool such as ssh (discussed later in the chapter on Remote Access).


The server console provides you with basic, direct access to your server. From the server console you can get the following information and perform the following tasks:

Option 1: Check status of this server

Provides you with uptime information about your server.

Console-status.png

Option 2: Configure this server

Allows you to view and modify the configuration information you entered during the original installation (ethernet cards, IP address information, DHCP, DNS, domain names, etc.).

Console-config.png

Option 3: Test internet access

Allows you to test your Internet access.

034.png

Option 4: Reboot, shutdown or reconfigure you server

Allows you to smoothly reboot, reconfigure or shut down your server.

035.png

Option 5: Manage disk redundancy

Allows you to manage and view the current RAID status.

For more information see the Raid howto

036.png

Option 6: Access server manager

Provides you with a means to access the web-based server manager using a text-based browser. This is the same interface to which you can connect from another system using a normal graphical browser. This option merely allows you to perform these functions directly from the server console.

Console-text-browser.png

Using the Text-based Browser

For Option 4, Access server manager with text-mode browser, the server uses a text-based browser called lynx to allow you to access the web-based server manager from the server console. Navigation is primarily with the arrow keys - up and down to move through the page, right arrow to follow a link, left arrow to go back. Lynx has a wide range of other commands which you can learn about through the online help available at http://lynx.browser.org/ Note that for security reasons some regular features of lynx are disabled when you are browsing from the server console (such as the ability to specify an external URL). Type 'q' (for 'quit') to exit the text-based browser.

Accessing the Linux Root Prompt

If you are an expert user and would like to do advanced modifications to the configuration of your server, you can access the Linux operating system underlying the SME Server software by logging in as the user "root". If your server is displaying the server console and not a login prompt, you can press Alt-F2 to switch to another screen with a login prompt. To switch back, press Alt-F1. You should always ensure that you log out from the root account when you are finished and before you switch back to the server console.

The password for the "root" user is whatever password is currently set for the administrator of the server. Note that this is the same password as that used by the "admin" user account.

Be aware that this ability to switch between the server console and a login prompt is only available when you have physical access to the server. If you connect in remotely as the "admin" user and see the server console, you will not be able to switch to a login prompt in that window. (You can, however, open up another remote connection to your server and login as the "root" user.) Note that remote administrative access is disabled by default and must be specifically enabled through the Remote Access panel of the server manager.


Important.png Note:
If you are not familiar with working from the Linux prompt, you may be interested in trying a file management tool called Midnight Commander. It allows you to perform many file operations through a menu-driven interface. Simply type mc at the command prompt. Press the function key "F1" for help and "F10" to quit.


Option 7: View support and licensing information

Displays the GNU General Public License (the license governing the distribution and use of SME Server software) and information on how to contact Contribs.org for support.

Console-license.png

Option 8: Perform backup to USB device

Attach a USB Device and follow the prompts.

Custom db setting for the compression level of the *.tgz file and hence the speed of the backup can be set from -9 to -1, default is -9.

Regulate the speed of compression using the specified digit n, where `-1' indicates the fastest compression method (less compression) and or `-9' indicates the slowest compression method (optimal compression). The default compression level is `-9' (that is, biased towards high compression at expense of speed).

Console USB Backup, allow user setting of compression level

db configuration setprop backupconsole CompressionLevel=-6

To restore this type of USB Backup, perform a clean install and when prompted if you wish to restore attach the USB Drive.


Warning.png Warning:
If the USB Drive is left attached during the install it will be formatted !!


Console-backup.png


Important.png Note:
The console backup to USB device is an independent method not related to the server-manager backup options. SME_Server:Documentation:Administration_Manual:Chapter10