2,569
edits
Changes
Jump to navigation
Jump to search
mLine 15:
Line 15: − +
SME Server:Documentation:Administration Manual:Chapter5 (view source)
Revision as of 08:29, 30 June 2007
, 08:29, 30 June 2007→Software Mirroring
=====Software Mirroring=====
=====Software Mirroring=====
The SME Server comes by default with RAID1 disk mirroring if you install one or two drives. The server is configured to accept one drive and will function properly. You can verify the RAID1 status from the console. --server manager.-- If you later wish to add a second drive, just add it and instruct the server via the console. --server manager.-- to create the mirror. It will take some time to build so do it during scheduled maintenance. They can be either SCSI or IDE drives.
The SME Server comes by default with RAID1 disk mirroring if you install one or two drives. The server is configured to accept one drive and will function properly. You can verify the RAID1 status from the console. If you later wish to add a second drive, just add it and instruct the server via the console to create the mirror. It will take some time to build so do it during scheduled maintenance. They can be either SCSI or IDE drives.
{{DrawBoxNote|content=The SME Server supports many levels of software implementations of RAID. The number of drives you install will dictate how the server will automatically configure itself. Note: All disks must be of the same size.
{{DrawBoxNote|content=The SME Server supports many levels of software implementations of RAID. The number of drives you install will dictate how the server will automatically configure itself. Note: All disks must be of the same size.