Changes

975 bytes added , 05:24, 12 April 2012

Line 1: Line 1:

=Version 8.0 testing=

−

This document lists tests that we need to do to get version 8.0 ~~closer~~ to a final release. It's an attempt to invite as many testers as possible and to coordinate our testing work.

This document lists tests that we need to do to get version 8.0 to a final release. It's an attempt to invite as many testers as possible and to coordinate our testing work.

−

The document should be used as Work In Progress so please feel free to add additional test scenarios and comments

The document should be used as Work In Progress so please feel free to add additional test scenarios and comments.

All tests here should be based on the latest available version ''''8.0 beta 7''''. (with updates including smeupdates-testing you have a preview of a work in progress ''''8.0RC1'''')

Line 41: Line 41:

==Test Schedule and Header codes==

−

A sample test ~~sheet~~ is provided below. Check one feature at a time and add comments. We will use a shorthand in the header line so we can check progress quickly

A sample test schedule is provided below. Check one feature at a time and add comments. We will use a shorthand in the header line so we can check progress quickly. The test list below starts with no headers since we start afresh. The intention is for testers to update this document to reflect their testing, thus avoiding duplication.

* header blank - unchecked

* header ? - questions, or more to do

* header bug - there is a bug

* header Pass - means the section has been tested and has passed

Some sample comments have been left from previous work during testing of sme7.0b4 for information since they outline useful procedures, please add your own comments as applicable.

=Installation=

Line 52: Line 54:

Different installation scenarios re. software RAID, LVM and NOSPARE usage, etc. Note that you need to test each scenario separately, meaning reinstalling from scratch for each test - you cannot modify a Raid configuration after a system has been installed.

−

~~to check~~: /var/log/messages; server-console, item 5; cat /proc/mdstat (which is the same as server-console, item 5;)

Check this for each configuration:

: /var/log/messages

: server-console, item 5

: cat /proc/mdstat (which is the same as server-console, item 5;)

−

*RAID1 nolvm spares=2 ~~- Pass~~

*RAID1 nolvm spares=2

Comments:

−

*RAID1 "nolvm" ~~- Pass~~

*RAID1 "nolvm"

Comments: Installation was RAID1, nolvm with one physical disk only; adding second disk still to be tested

−

*RAID5 (with lvm) spares=0 ~~- Pass~~

*RAID5 (with lvm) spares=0

Comments:

−

*RAID5 nolvm spares=2 ~~- Pass~~

*RAID5 nolvm spares=2

Comments:

−

*RAID6 (with lvm) spare=1 multipart ~~- Pass~~

*RAID6 (with lvm) spare=1 multipart

Comments:

*RAIDx "nolvm"

Line 71: Line 76:

==Upgrade from older versions ==

−

==~~=From 7.4===~~

==CD upgrade from a clean SME7.5.1==

−

CD upgrade from a clean SME7.~~4 installation~~ to ~~SME8b4~~.

Installation to SME8.0RC1 cannot be tested until an ISO of SME8.0RC1 is available.

The message as below in ''/var/log/messages'' can be safely ignored, see: [[bugzilla:5486]]:

Line 93: Line 98:

''/root/upgrade.log'' :

−

* For ''db4 error(22)'': [[bugzilla:5489]]

* For ''db4 error(22)'': (check if it has been fixed) [[bugzilla:5489]]

* For ''No module mptscsi found'': [[bugzilla:5490]]

* For ''PHP Warning: PHP Startup: Unable to load dynamic library'': [[bugzilla:5491]]

−

===from 7.3 and lower===

===from 7.4.0 and lower===

If in doubt, first update to 7.5.1

==YUM upgrade from a clean SME7.5.1==

* Test Yum upgrade following procedures found in http://wiki.contribs.org/SME_Server_8

===from 7.4.0 and lower===

−

If in doubt, first update to 7.4

If in doubt, first update to 7.5.1

=Console =

−

* cosmetic bug 3561

* cosmetic bug 3561 (check if it has been fixed) [[bugzilla:3561]]

briefly displays 'Could not open pci table...'

==Check Status==

−

~~Pass - the~~ server displays 'This sever has been running for ...'

* The server displays 'This sever has been running for ...'

==Configure Server==

−

~~basic~~ configuration works, eg NIC's, password, host and domain names

* Basic configuration works, eg NIC's, password, host and domain names

===DHCP server===

−

*test IP allocation ~~- Pass~~

*test IP allocation

: for predefined MAC addresses (= 'static' IP allocation)

: for dynamic IPs

===Server-gateway===

−

*~~Pass~~

*Check functionality

−

Comments: Running as gateway behind broadband router with static IP for several weeks; all sorts of incoming connections tested (email, ssh, webmail, server-manager access) successfully, also outgoing traffic from various PCs (Windows, Linux) on LAN

Sample Comments: Running as gateway behind broadband router with static IP for several weeks; all sorts of incoming connections tested (email, ssh, webmail, server-manager access) successfully, also outgoing traffic from various PCs (Windows, Linux) on LAN

===Server-only===

* Check functionality

:Private server & gateway

:Server-only

Comments:

−

~~Comments: Both scenarios tested~~

==Test internet==

−

* ~~Pass -~~ Prompt displays, then 'The test was successful...'

* Prompt displays, then 'The test was successful...'

==Reboot==

−

* ~~Pass for~~ each of

* Check each of the console options:

: reboot

−

: reconfigure

: shutdown

==Raid==

−

*~~pass~~

*Check each of the following:

−

console, option 5, displays correctly for single disk

: console, option 5, displays correctly for single disk

−

displays correctly for various RAID scenarios, all those combinations which we tested under [[SME8.0_QA#Installation_types]]

: console, option 5, displays correctly for various RAID scenarios, all those combinations which we tested under [[SME8.0_QA#Installation_types]]

−

another disk added to a one disk system, open console, option 5, prompted to add drive, drive added, option 5 states all drives in clean state.

: another disk added to a one disk system, open console, option 5, prompted to add drive, drive added, option 5 states all drives in clean state.

−

==Access Server ~~Manger~~==

==Access Server Manager==

−

* ~~Pass -~~ server-manager displays and navigation works

* server-manager displays and navigation works

==View Support==

−

*~~Pass,~~ The GPL text displays

*The GPL text displays

==Backup to USB==

−

console restore~~, pass~~

: Check each of the following:

* console restore

−

console backup~~, pass~~

* console backup

−

=Server Manager ?=

=Server Manager =

−

==Collaboration ?==

==Collaboration ==

===Users===

−

*create new user account ~~- PASS~~

*create new user account

−

*reset user password ~~- Pass~~

*reset user password

−

Comments: server-manager message OK, eventlog check OK

Comments: i.e. server-manager message OK, eventlog check OK

−

*lock/unlock account ~~- Pass~~

*lock/unlock account

−

Comments: both activities checked; server-manager messages OK, eventlog check OK

Comments: i.e. both activities checked; server-manager messages OK, eventlog check OK

−

*add/remove user to different groups ~~- Pass~~

*add/remove user to different groups

−

Comments: added user to various other groups and later removed from all of these groups

Comments: i.e. added user to various other groups and later removed from all of these groups

−

*delete user account ~~- Pass~~

*delete user account

−

*re create deleted user account ~~- PASS~~

*re create deleted user account

−

*reset user password user account ~~- Pass~~

*reset user password user account

===Groups===

−

Add, modify and remove groups ~~- PASS~~

* Add, modify and remove groups

: Comments:

===Quotas===

−

* Setting quota (soft:10MB / hard: 20MB) and going over hard limit works: ~~-PASS~~

* Setting quota (soft:10MB / hard: 20MB) and going over hard limit works:

# dd if=/dev/zero of=/mnt/user-a/user-a_21MB bs=22020096 count=1

1+0 records in

Line 184: Line 199:

dd: closing output file `/mnt/user-a/user-a_21MB': No space left on device

−

* Setting quota (soft:20MB / hard: 40MB) and going over soft limit works: ~~-PASS~~

* Setting quota (soft:20MB / hard: 40MB) and going over soft limit works:

To: User B <user-b@testdomain.lan>

From: "Automated quota report" <do-not-reply@testdomain.lan>

Line 197: Line 212:

===Pseudonyms===

−

* ~~Pass~~

* Test the following:

−

:created a pseudonym jane to sent to usera

:created a pseudonym jane@test.org to userb

−

sent mail to both which was received as expected

: Comment: i.e. sent mail to both which was received as expected

−

===Information Bays x===

===Information Bays===

====User access via file sharing ====

−

basic smb file access working as expected. Permissions checked (smb) with several groups, users and all permission-combinations

* basic smb file access working as expected

* Permissions checked (smb) with several groups, users and all permission-combinations

−

====Public access via web ?====

====Public access via web====

−

* Primary website access tested form public Internet. If not configured, the default (".. under construction ..") works.

* Primary website access tested form public Internet. If not configured, the default (".. under construction ..") works

−

* Ibay accessible for http(s) from outside network without password ~~- PASS~~

* Ibay accessible for http(s) from outside network without password

−

* Ibay accessible for http(s) from outside network with a password ~~-NEEDS TESTING~~

* Ibay accessible for http(s) from outside network with a password

−

* Ibay accessible for http(s) from local network without password and outside network with a ~~pass -NEEDS TESTING~~

* Ibay accessible for http(s) from local network without password and outside network with a password

====Local access via web====

−

* Primary website accessible for http(s) from the local network ~~-PASS~~

* Primary website accessible for http(s) from the local network

−

* Ibay not accessible for http(s) from local network when set to 'No Access' ~~-PASS~~

* Ibay not accessible for http(s) from local network when set to 'No Access'

−

* Ibay accessible for http(s) from local network without password ~~-PASS~~

* Ibay accessible for http(s) from local network without password

−

* Ibay accessible for http(s) from local network with a password ~~-PASS~~

* Ibay accessible for http(s) from local network with a password

−

''/var/log/httpd/error_log'' ([http://bugs.contribs.org/show_bug.cgi?id=5492 Bug #5492]):

''/var/log/httpd/error_log'' ([http://bugs.contribs.org/show_bug.cgi?id=5492 Bug #5492]): (still existing?)

[Thu Sep 24 22:45:56 2009] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)

[Thu Sep 24 22:45:56 2009] [warn] RSA server certificate CommonName (CN) `sme8b4clean.testdomain.lan' does NOT match server name!?

−

====Public access via ftp ~~-x==~~==

====Public access via ftp==

* check functionality as applicable

:Comment:

====Local access via ftp====

−

* Primary & ibay not accessible when ftp set to 'No Access' ~~-PASS~~

* Primary & ibay not accessible when ftp set to 'No Access'

−

* Primary ibay accessible anonymous for download, not upload ~~-PASS~~

* Primary ibay accessible anonymous for download, not upload

−

* Ibay (no password required) accessible anonymous without password for download, not upload ~~-PASS~~

* Ibay (no password required) accessible anonymous without password for download, not upload

−

* Ibay (password required) accessible anonymous only with password for download, not upload ~~-PASS~~

* Ibay (password required) accessible anonymous only with password for download, not upload

−

* User homedir accessible with username+pass for download and upload ~~-PASS~~

* User homedir accessible with username+pass for download and upload

−

* Ibay accessible with username+pass for download and upload (with ibay permissions correctly set) ~~-PASS~~

* Ibay accessible with username+pass for download and upload (with ibay permissions correctly set)

−

* Ibay accessible with username+pass for download and not upload (with ibay permissions correctly set) ~~-PASS~~

* Ibay accessible with username+pass for download and not upload (with ibay permissions correctly set)

−

* Ibay not accessible with username+pass (with ibay permissions correctly set) ~~-PASS~~

* Ibay not accessible with username+pass (with ibay permissions correctly set)

−

====Dynamic content ?====

====Dynamic content====

−

* PHP scripts in Primary ibay are interpreted and displayed ~~-PASS~~

* PHP scripts in Primary ibay are interpreted and displayed

−

* PHP scripts in ibay are/not interpreted and displayed when dynamic content is enabled/disabled ~~-PASS~~

* PHP scripts in ibay are/not interpreted and displayed when dynamic content is enabled/disabled

−

* CGI scripts (cgi-bin) ~~-NEEDS TESTING~~

* CGI scripts (cgi-bin)

−

==Administration x==

==Administration==

===Backup and restore ===

Line 256: Line 274:

=====to desktop=====

−

a server with a small amount of data created a smeserver.tgz correctly

Comment: i.e. a server with a small amount of data created a smeserver.tgz correctly

−

=====to tape x=====

=====to tape=====

−

~~TO DO~~

Comment:

=====to workstation=====

−

* pass - tested a set of three to a cifs share

Comment: i.e. tested a set of three to a cifs share

=====to usb disk =====

−

~~pass~~

Comment:

====Restore ====

−

~~pass~~

Comment:

=====from desktop=====

−

~~Restoring~~ from desktop is actually via the console, put you .tgz on a cd or usb device, pass

Comment: i.e. restoring from desktop is actually via the console, put you .tgz on a cd or usb device, pass

=====from tape=====

−

~~=====from tape x=====~~

Comment:

−

~~TO DO~~

=====from workstation=====

−

* pass - tested a set of three to a cifs share, with verification

Comment: i.e. tested a set of three to a cifs share, with verification

=====from usb disk =====

−

~~pass~~

Comment:

−

===View log files===

−

view log files works, including filtering and highlighting

* view log files works, including filtering and highlighting

−

download logfile works

* download logfile works

===Mail log files===

−

local mail delivery is reported

* local mail delivery is reported

−

external mail delivery is tested (ongoing use for a 'production' home server) and email logs are OK

* external mail delivery is tested (ongoing use for a 'production' home server) and email logs are OK

===Reboot and shutdown===

−

* ~~Pass~~ for each of

* Test from server-manager for each of:

:reboot

:reconfigure

:shutdown

−

==Security x==

==Security==

===Remote access===

====VPN / PPTP ====

−

* ~~Pass~~

* Check functionality

:Set a number of PPTP clients in server manager and test remote access (repeatedly)

Line 315: Line 333:

====SSH====

−

*~~Pass -~~ remote access from local network on port other than 22

Check the following:

−

*External user/password access denied (port 22 and other) when set to 'No access' or 'Local network' ~~--PASS~~

*remote access from local network on port other than 22

−

*External user/password access allowed (port 22 and other) when set to 'Entire internet' ~~--PASS~~

*External user/password access denied (port 22 and other) when set to 'No access' or 'Local network'

−

*External user/password access denied (port 22 and other) for root when 'allow administrative commandline' to 'No' ~~--PASS~~

*External user/password access allowed (port 22 and other) when set to 'Entire internet'

−

*External user/password access allowed (port 22 and other) for user (if configured) when 'administrative commandline' to 'No' ~~--PASS~~

*External user/password access denied (port 22 and other) for root when 'allow administrative commandline' to 'No'

−

*External user/password access denied (port 22 and other) when 'allow standard password' set to 'No' ~~-PASS~~

*External user/password access allowed (port 22 and other) for user (if configured) when 'administrative commandline' to 'No'

−

*External certificate access denied (port 22 and other) for root when 'administrative commandline' to 'No' and 'allow standard password' set to 'No' ~~-PASS~~

*External user/password access denied (port 22 and other) when 'allow standard password' set to 'No'

−

*External certificate access allowed (port 22 and other) for root when 'administrative commandline' to 'Yes' and 'allow standard password' set to 'No' ~~-PASS~~

*External certificate access denied (port 22 and other) for root when 'administrative commandline' to 'No' and 'allow standard password' set to 'No'

−

*External certificate access allowed (port 22 and other) for user (if configured) when 'administrative commandline' to 'No' and 'allow standard password' set to 'No' ~~-PASS~~

*External certificate access allowed (port 22 and other) for root when 'administrative commandline' to 'Yes' and 'allow standard password' set to 'No'

−

*External certificate access allowed (port 22 and other) for user (if configured) when 'administrative commandline' to 'Yes' and 'allow standard password' set to 'No' ~~-PASS~~

*External certificate access allowed (port 22 and other) for user (if configured) when 'administrative commandline' to 'No' and 'allow standard password' set to 'No'

*External certificate access allowed (port 22 and other) for user (if configured) when 'administrative commandline' to 'Yes' and 'allow standard password' set to 'No'

====FTP====

−

* Ftp access allowed for Primary, ibays and users when access set to 'Allowe access ...' ~~-PASS~~

* Ftp access allowed for Primary, ibays and users when access set to 'Allowe access ...'

−

* Ftp access refused for Primary, ibays and users when access set to 'No Access' ~~-PASS~~

* Ftp access refused for Primary, ibays and users when access set to 'No Access'

−

===Local Networks x===

===Local Networks===

Comment:

===Port forwarding===

Check the following scenarios:

−

server gateway ~~- PASS~~

* server gateway

−

~~Tested~~ successfully with port 3389 (RDP) to WIndows terminal server on LAN

Comment: i.e. tested successfully with port 3389 (RDP) to WIndows terminal server on LAN

−

server only ~~- pass~~

* server only

−

"This server is currently in ~~serveronly~~ mode and ~~portforwarding~~ is not possible."

Comment: i.e."This server is currently in server-only mode and port forwarding is not possible."

===Proxy settings===

Line 346: Line 367:

====Mail====

−

*Smtp proxy enabled ~~- PASS~~

*Smtp proxy enabled

−

Test with Thunderbird client - Email delivery works and the headers clearly show that the local smtp server has been used for the delivery rather the smtp that was setup in the email client

Comment: i.e. Test with Thunderbird client - Email delivery works and the headers clearly show that the local smtp server has been used for the delivery rather the smtp that was setup in the email client

−

*Smtp proxy disabled ~~- PASS~~

*Smtp proxy disabled

−

Follow up test to above with the same Thunderbird configuration - this time the intended, external smtp server has been used for the delivery and NOT the local smtp server.

Comment: i.e. Follow up test to above with the same Thunderbird configuration - this time the intended, external smtp server has been used for the delivery and NOT the local smtp server.

*Smtp proxy blocked (recently implemented)

Comment:

====Web====

Check the following:

* net access via the squid proxy works

−

~~net access via the squid proxy works~~

* net access is disabled via squid proxy if disabled

−

net access is disabled via squid proxy if disabled

==Configuration ==

Line 364: Line 388:

====Updates====

−

updates via the panel work

* updates via the panel work

−

the updates available warning displays

* the updates available warning displays

====Settings====

−

Settings can be changed

* Settings can be changed

−

Installing additional software works

* Installing additional software works

: Examples:

Installing:

Line 388: Line 413:

'Set Date and Time' manually works

−

'Configure Network Time Server' works, if you enter a valid time server

'Configure Network Time Server' works if you enter a valid time server

===Workgroup ===

Line 395: Line 420:

Now also working for windows 7 PC's

−

*PDC - setup Primary Domain Controller ~~- Pass~~

*PDC - setup Primary Domain Controller

−

~~Steps~~:

Suggested steps:

−

* join PC to domain (as user 'admin') and test domain user logon on that PC ~~- Pass~~

* join PC to domain (as user 'admin') and test domain user logon on that PC

−

* join (another) PC to domain (as a different user from group 'Domain Admins', NOT user admin) ~~- Pass~~

* join (another) PC to domain (as a different user from group 'Domain Admins', NOT user admin)

Comments: The user 'michael' is part of that group:

db accounts show domain-admin-group

Line 407: Line 432:

Uid=5010

−

Comments: ~~Here is a~~ log extract from /var/log/messages for the latest join:

Comments: i.e. log extract from /var/log/messages for the latest join:

Aug 30 07:04:52 mdo002sv esmith::event[20711]: Running event handler: /etc/e-smith/events/machine-account-create/S10create-machine-account

Aug 30 07:04:52 mdo002sv /etc/e-smith/events/machine-account-create/S10create-machine-account[20712]: /home/e-smith/db/accounts: OLD twt042lt$ (undefined)

Line 417: Line 442:

−

* domain user password change via Ctrl-Alt-Del ~~- Partially~~

* domain user password change via Ctrl-Alt-Del

−

Comments: ~~Several~~ combinations tested, incl. invalid combinations (e.g. password too short); successfully changed; case sensitivity tested; testing was done with the following setting in place:

Comments: i.e. several combinations tested, incl. invalid combinations (e.g. password too short); successfully changed; case sensitivity tested; testing was done with the following setting in place:

db configuration show passwordstrength

passwordstrength=configuration

Line 428: Line 453:

====Workgroup server ====

−

Connect to samba share~~, pass~~

* Connect to samba share

====Roaming profiles====

−

~~====Roaming profiles====~~

* Test with WinXP Pro AND Win7 Pro clients

−

~~Tested successfully with WinXP Pro AND Win7 clients - PASS~~

Comments:

===Directory===

Check the following:

* Directory (LDAP) access

−

~~Directory (LDAP)~~ access ~~- PASS~~

*Test access from various email clients, list client, platform, Operating system, local and or external:

−

~~Test access from various email clients, list client, platform, Operating system, local and or external~~

In example:

−

: Webmail (list address book contents via string like "mich" shows all Michael(s))

−

~~- webmail~~ (list address book contents via string like "mich" shows all Michael(s)) ~~- PASS~~

: Thunderbird LDAP test on local network

−

- Thunderbird LDAP test on local network ~~- PASS~~

===Printers ===

Attached/created LTP,USB and network printer; Printing test page:

−

* USB printer ~~-PASS~~

* USB printer

−

* LTP printer ~~-PASS~~

* LTP printer

−

* Network printer ~~-PASS~~

* Network printer

===Hostnames===

Line 459: Line 486:

(tested with several other hosts)

−

===Domains ?===

===Domains===

−

2nd domain added, web and email works

* 2nd domain added, web and email works

−

DNS options ~~to be tested~~

* Test all DNS options

−

===Email ?===

===Email===

−

====Access ?====

====Access====

Test functionality for the following:

*webmail

−

*webmail works

*pop3(s)

−

*pop3(s)

Comments:

−

*imap(s) ~~- Pass~~

*imap(s)

−

Comments: Intensive, ongoing testing with imap & imaps access from LAN PCs and external

Comments: i.e. Intensive, ongoing testing with imap & imaps access from LAN PCs and external

−

to check: /var/log/pop3(s)/current; /var/log/imap(s)/current

* check: /var/log/pop3(s)/current

* check: /var/log/imap(s)/current

−

====Filtering x====

====Filtering====

−

====Reception x====

====Reception====

−

====Delivery x====

====Delivery====

===Antivirus ===

−

*Clam/email integration ~~- Pass~~

Clam/email integration

−

~~to check: /var/log/qmail/current; /var/log/spamd/current; /var/log/qpsmtpd/current; /var/log/clamd/current; /var/log/clamd/smeserver-clamscan.log; email headers~~

−

~~Comments~~: ~~Server runs in a semi production state~~ - ~~as a home server with various email accounts for family members (static IP, registered domain name)~~. ~~Have done regular checks for quite some time and there is nothing unusual or unexpected in all~~ email ~~logs. Incl. email header checks for spam recognition and filtering.~~

* Check: /var/log/qmail/current

* Check: /var/log/spamd/current

* Check: /var/log/qpsmtpd/current

* Check: /var/log/clamd/current

* Check: /var/log/clamd/smeserver-clamscan.log

* Check: email headers

−

*regular Clam scans - ~~Pass~~

Comments: i.e. Server runs in a semi production state - as a home server with various email accounts for family members (static IP, registered domain name). Have done regular checks for quite some time and there is nothing unusual or unexpected in all email logs. Incl. email header checks for spam recognition and filtering.

−

~~enable~~ regular ~~scanning~~ in ~~server-manager~~ and ~~check results (email to admin)~~

−

~~Comments: Runs weekly without problems, emails~~ to admin ~~working.~~

* Check regular Clam scans

* Enable regular scanning in server-manager and check results (email to admin)

Comments: i.e. Runs weekly without problems, emails to admin working.

===Review===

Burnat

Administrators

351

edits

Retrieved from "https://wiki.koozali.org/Special:MobileDiff/16148...16223"

Changes

SME8.0 QA (view source)

Revision as of 05:24, 12 April 2012

Navigation menu

Search