PHP Software Collections

From SME Server
Jump to navigationJump to search


PythonIcon.png Skill level: Easy
The instructions for installing and using Roundcube can be followed by a beginner, changing options requires a basic knowledge of linux.


Is this article helpful to you?
Please consider donating or volunteering
Thank you!

PHP Software Collections for SME Server

Maintainer

stephdl Stéphane de Labrusse AKA Stephdl

Version

Contrib 9:
smeserver-php-scl
The latest version of smeserver-php-scl is available in the SME repository, click on the version number(s) for more information.


Description

The purpose of the contribs is to install PHP54,PHP55,PHP56 beside the default php without remove it. We take rpms from the remi repository but in fact it is the same than the official web site, except than you will have more choices.

All PHP rpms are installed in /opt, you won't have interferences with default PHP.

Requirements

Warning.png Warning:
Only for SME Server 9 64 bit


Installation

Remember to first configure the required stephdl and the remi repositorie, then issue the following command on the SME Server shell:

db yum_repositories set stephdl repository \
BaseURL http://mirror.de-labrusse.fr/smeserver/\$releasever \
EnableGroups no GPGCheck yes \
Name "Mirror de Labrusse" \
GPGKey http://mirror.de-labrusse.fr/RPM-GPG-KEY \
Visible yes status disabled

 /sbin/e-smith/db yum_repositories set remi repository \
Name 'Remi - EL6' \
BaseURL 'http://rpms.famillecollet.com/enterprise/6/remi/$basearch/' \
EnableGroups no \
GPGCheck yes \
GPGKey http://rpms.famillecollet.com/RPM-GPG-KEY-remi \
Visible yes \
Exclude mysql*,php-* \
status disabled
 signal-event yum-modify

Then Issue the command line

yum install smeserver-php-scl --enablerepo=stephdl,remi

If you do not want to restart your server

signal-event php-update; config set UnsavedChanges no

or

signal-event post-upgrade; signal-event reboot

Go to the php-scl panel on Server Manager and activate the version of php you desire for each Ibay, or if you need for the whole server.

Usage

For ibay when you want to decide which version of php you want, you can use the panel, but if you want to set the php version for the whole server, you have to use the command line, first see the new db entries.

After each modification don't forget to launch the event 'signal-event php-update'

[root@sme9b3dev64 ~]# config show php54
php54=configuration
   AllowUrlFopen=Off     #(On/Off)
   MaxExecutionTime=30
   MaxFileUpload=20
   MaxInputTime=60
   MemoryLimit=128M
   PhpModule=disabled    #(enabled/disabled)
   PostMaxSize=20M
   UploadMaxFilesize=10M
[root@sme9b3dev64 ~]# config show php55
php55=configuration
   AllowUrlFopen=Off     #(On/Off)
   MaxExecutionTime=30
   MaxFileUpload=20
   MaxInputTime=60
   MemoryLimit=128M
   PhpModule=disabled    #(enabled/disabled)
   PostMaxSize=20M
   UploadMaxFilesize=10M
[root@sme9b3dev64 ~]# config show php56
php56=configuration
   AllowUrlFopen=Off      #(On/Off)
   MaxExecutionTime=30
   MaxFileUpload=20
   MaxInputTime=60
   MemoryLimit=128M
   PhpModule=disabled    #(enabled/disabled)
   PostMaxSize=20M
   UploadMaxFilesize=10M


in fact you have to choose which version you want to use in the phpmod of apache (only one version can be used), for example

config setprop php56 PhpModule enabled
signal-event php-update

Since just one version can be used with php-mod, the lower version is used....all disabled and it is the php default version which is used


Find other RPMS

Important.png Note:
Now when you want a specific rpm, you have to install it from the 'remi' repository. The name start by php54-php or php55-php or php56-php


If you want to see available rpm

yum list available php5\* --disablerepo=* --enablerepo=remi

For example if you want to install the php rpm for pgsql

yum install php54-php-pgsql php55-php-pgsql php56-php-pgsql --enablerepo=remi

Uninstall

yum remove smeserver-php-scl

Bugs

Please raise bugs under the SME-Contribs section in bugzilla and select the smeserver-php-scl component or use this link .

"No open bugs found."