Difference between revisions of "Monitor Disk Health"
From SME Server
Jump to navigationJump to searchm |
|||
| Line 24: | Line 24: | ||
Error code description: http://en.wikipedia.org/wiki/S.M.A.R.T. | Error code description: http://en.wikipedia.org/wiki/S.M.A.R.T. | ||
| − | <noinclude>[[Category:Howto]]</noinclude> | + | <noinclude>[[Category:Howto]][[Category:Administration:Monitoring]]</noinclude> |
Revision as of 16:07, 10 May 2010
Monitor Disk Health
Self-Monitoring, Analysis and Reporting Technology (SMART) is built into many ATA-3 and later ATA, IDE and SCSI-3 hard drives. The purpose of SMART is to monitor the reliability of the hard drive and predict drive failures, and to carry out different types of drive self-tests.
To enable
config setprop smartd status enabled
And start, (smartd will start automatically on a reboot if enabled)
/etc/rc.d/init.d/smartd start
Errors are emailed admin if and when they are found.
To manually check disks
Generate report
smartctl -t short /dev/hdc (1 minute) smartctl -t long /dev/hdc (1 hour)
View report
smartctl -a /dev/hdc
http://www.linuxmanpages.com/man8/smartd.8.php
http://www.captain.at/howto-linux-smartmontools-smartctl.php
Error code description: http://en.wikipedia.org/wiki/S.M.A.R.T.
