Difference between revisions of "Egroupware"

From SME Server
Jump to navigationJump to search
m (repo change)
Line 19: Line 19:
  
 
With this RPM you can use eGroupWare on your SME 7.x (and above). You can install it as one single package in a very comfortable way.
 
With this RPM you can use eGroupWare on your SME 7.x (and above). You can install it as one single package in a very comfortable way.
 
==Download==
 
You can download this package at ''http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/7/smecontribs/i386/RPMS/smeserver-egroupware-1.4.002-3.el4.sme.noarch.rpm smeserver-egroupware]'' . If you would like to save it directly on your SME Server, you should give this command at a linux-prompt
 
wget http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/7/smecontribs/i386/RPMS/smeserver-egroupware-1.4.002-3.el4.sme.noarch.rpm
 
  
 
==Installation==
 
==Installation==
 
For installation just hit the following command
 
For installation just hit the following command
  rpm -Uvh smeserver-egroupware-1.4.002-3.noarch.rpm
+
  yum install smeserver-egroupware --enablerepo=sme-contribs
  
 
==Update/Upgrade==
 
==Update/Upgrade==
Line 57: Line 53:
 
==Uninstallation==
 
==Uninstallation==
 
For uninstall just hit the following command
 
For uninstall just hit the following command
  rpm -e smeserver-egroupware
+
  yum remove smeserver-egroupware
 
In the new release (1.4.002-x), if you want to completly remove eGroupWare from your server, you need the following command:
 
In the new release (1.4.002-x), if you want to completly remove eGroupWare from your server, you need the following command:
 
  sh /root/eGW_Full_Uninstall.sh
 
  sh /root/eGW_Full_Uninstall.sh

Revision as of 18:04, 22 February 2008


eGroupWare 1.4.002 for SME 7.x and above

Maintainers

Dietmar Berteld
mailto:dietmar@berteld.com

Sylvain Gomez
mailto:sylvaingomez@free.fr

Description

eGroupWare is a free enterprise ready groupware software for your network. It enables you to manage contacts, appointments, todos and many more for your whole business.

eGroupWare is a groupware server. It comes with a native web-interface which allowes to access your data from any platform all over the planet. Moreover you also have the choice to access the eGroupWare server with your favorite groupware client (Kontact, Evolution, Outlook) and also with your mobile or PDA via SyncML.

eGroupWare is international. At the time, it supports more than 25 languages including rtl support.

For more information see http://www.egroupware.org/.

With this RPM you can use eGroupWare on your SME 7.x (and above). You can install it as one single package in a very comfortable way.

Installation

For installation just hit the following command

yum install smeserver-egroupware --enablerepo=sme-contribs

Update/Upgrade

Please note that this RPM cannot upgrade eGroupWare 1.2.x

Warning.png Warning:
Because of a bug in old RPM versions*, YOU MUST UNINSTALL THE OLD RPM BEFORE UPDATING WITH THE FOLLOWING COMMAND:
rpm -e smeserver-egroupware --noscripts

This will prevent installation files and MySQL to be deleted.

* Affected versions are smeserver-egroupware-1.4-10 and older


Then, you can update your existing 1.4 installation with

rpm -Uvh smeserver-egroupware-1.4.002-3.noarch.rpm

If you were upgrading eGroupWare version (i.e.1.4.001 to 1.4.002) you must finish the upgrade at the Config-Admin Setup with your existing credentials. Then click on upgrade...

EGW-upgrade-step1.png

Then re-check your install

EGW-upgrade-step2.png

If all went ok, upgrade is done!

EGW-upgrade-step3.png

A backup is done by the RPM before updating. All Files and MySQL DataBase are saved in /opt/eGW_RPM_BACKUP You must move the backup to a safe directory.

This automatic step is just for safety, make your own backup before updating/upgrading.

Uninstallation

For uninstall just hit the following command

yum remove smeserver-egroupware

In the new release (1.4.002-x), if you want to completly remove eGroupWare from your server, you need the following command:

sh /root/eGW_Full_Uninstall.sh

This will delete eGroupWare's installation files, MySQL DB and SME DB entries.

Starting with eGroupWare

Please perform the Intial Configuration FIRST before login to eGroupWare. After that SME users can login to eGroupWare with their used SME account + password. At first login, eGroupWare creates user accounts and passwords automatically and synchronize them to the SME Server.

Inital Configuration

You can find eGroupWare in the /opt/egroupware directory. For using eGroupWare start your browser with the URL http://servername/egroupware/setup and logon with the user config-admin + password admin at Setup/Config Admin Login.

EGW-config-admin-en.png

Now you should create eGroupWare's admin-account. Because eGroupWare uses mail authentication, the admin-account must be a valid SME account/password. This account will be able to use+administrate eGroupWare.

EGW-create-admin-account-en.png

Logout after creating the admin account.

Changing passwords for eGW config-admin / header-admin

Go to your browser and logon with the user header-admin + password admin at Header Admin Login.

EGW-header-admin-en.png

Change the passwords for the users config-admin and header-adminnow:

EGW-password-config-admin-en.png

EGW-password-header-admin-en.png

Store the new passwords with "Write".


Warning.png Warning:
For security-reasons, change the passwords for the users config-admin and header-admin after your first login !


Adjusting accessibility

The default behaviour of eGroupWare is: accessible from LAN + Internet with "forced https" (SSL on + rewrite rule) You can easily change those defaults settings with following commands:

# config setprop egroupware HTTPS on
# config setprop egroupware HTTPS off
# config setprop egroupware PublicAccess global
# config setprop egroupware PublicAccess local

Once done, apply modifications and restart Apache:

# expand-template /etc/httpd/conf/httpd.conf
# service httpd-e-smith restart

Synchronization

eGroupWare provides Synchronization of calender, todo's, notes and addressbook with offline-clients like MS Outlook and PDA's. Unfortunally there is a requirement for PHP5 to accomplish these functions, which is not implemented in SME 7. But actually it is possible to sync to MS Outlook with the xmlrpc protocol and the eGWOSync application.

MS Outlook Synchronization

You can sync eGroupWare-Data to MS Outlook as follows:

1. Install certificate with MS Internet Explorer

  • Start Internet Explorer
  • Enter URL = https://servername
  • Enter "show certificate"
  • Enter "install certificate" and go on to install your SME certificate
Important.png Note:
Under Vista, you have to put your domain in the approved website list before being able to install the certificate.


2. MS Outlook

  • Finish your MS Outlook if active.
  • Go to system control, register mail.
  • show profiles... -> delete all profiles
  • Start MS Outlook, create a new profile with your mail account

3. eGWOSync

Download eGWOSync and .NET, if necessary. If your .NET release is newer than version 1.x, you must install both versions on your system.

  • You need .NET Version 1.x, eGWOSync accepts no newer versions
  • User/Password = SME user account/password
  • Domain = default
  • Hostname = SME domain
  • Port = 443
  • Use SSL = enabled
  • URL = keep default values
  • Perform test

4. Funambol

Download Web site: Funambol Web Site Download Funambol 6.0.14 link Funambol 6.0.14

                      1) Install Funambol 6.0.14
                      2) Change "7" to "0" for mbstring.func_overload = 0 in php.ini 
                      3) Open Outlook go to the Funambol Setup (Funambol --> Option)
                      4) Select all items
                      5) Setup options:

ACCOUNT

     Location = http://Domain Name/egroupware/rpc.php or http://Server IP/egroupware/rpc.php
     Username = Your user login name for eGroupWare
     Password = Your user password for eGroupWare

SYNC

     CONTACTS
     Sync Direction = Two-Way
     Remote name = ./sifcontacts
     Data Format = SIF
     CALENDAR
     Sync Direction = Two-Way
     Remote name = calendar
     Data Format = vCalendar
     TASKS
     Sync Direction = Two-Way
     Remote name = ./siftasks
     Data Format = SIF
     NOTES
     Sync Direction = Two-Way
     Remote name = ./sifnotes
     Data Format = SIF

--Snoopyski 19:04, 20 September 2007 (MDT)

Gallery2 addon

Gallery2 is the first addon available for eGroupWare 1.4.002

It has been integrated in smeserver-egroupware-1.4.002-3.noarch.rpm (but not installed by default)

Description

Gallery is an open source web based photo album organizer. Gallery gives you an intuitive way to blend photo management seamlessly into your own website whether you're running a small personal site or a large community site.

For more information see http://gallery.menalto.com/.

Gallery2 install

First, login at Config setup with your existing creditentials and clic on Manage Applications.

EGW-Manage-apps.png

Then simply click on Gallery install checkbox and save your changes.

EGW-Install-G2.png

Gallery2 setup

Once Installed, you need to configure your website and create the database. This step has been prepared by the RPM install.

Open your web browser at https://yourdomain.com/egroupware/gallery/gallery2/install and follow instructions.

In the 4th step, you will be asked for a storage folder. RPM install has prepared /opt/egroupware/files/g2data, please don't change neither path nor permissions!

EGW-G2-data.png

In the 5th step, you will be asked for MySQL informations. RPM install has prepared egwuser egroupware and your DbPassword automatically. Just save and finish the install.

EGW-G2-DB-setup.png

Gallery2 icon

Once the setup is done you can add the icon in eGroupWare's interface. Login to eGroupWare with an admin account, and edit a user or a group and add gallery

EGW-G2-add icon.jpg


Important.png Note:
The gallery can also be accessed with no authentication at https://yourdomain.com/egroupware/gallery/gallery2


Additional information


Have much fun with eGroupWare as your preferred Groupware !

Dietmar Berteld (berdie)