Dimp

From SME Server
Jump to navigation Jump to search


Warning.png Warning:
This contribs is available on SME 7, SME 8 and SME 9, however no longer maintained by its author, he suggests moving to Horde 5 for SME9 [see bug #8956].


Dimp for SME Server

Version

Contrib 9:
smeserver-dimp
The latest version of smeserver-dimp is available in the SME repository, click on the version number(s) for more information.


Contrib 9:
dimp-h3
The latest version of dimp-h3 is available in the SME repository, click on the version number(s) for more information.



Description

  • Dimp is a part of Horde framework.
  • DIMP is a version of IMP (1) which has a improved "dynamic" interface that may be preferable to the standard IMP interface.
  • Similar IMP functionality is implemented including mailbox viewing and paging, viewing messages, deleting, replying, forwarding, and composing new messages.

(1) Imp is the standard email interface (webmail) included in SME

Step-by-step HowTo for installation of Dimp on SME Server 8.x.

Installation

1. Log in (with username root) to the SME Server console.

2. Download and install dimp and smeserver-dimp

yum install smeserver-dimp --enablerepo=smecontribs 

3. Do following commands for the changes to take effect:

signal-event post-upgrade; signal-event reboot

Your SME server reboots

4. Connect to https://yourserver/webmail & select which version you wish to run (Imp or Dimp). Optionally if you try to connect to https://yourserver/horde/dimp/ at this stage, you will probably get this message:

dimp is not activated

5. Then we activate it:

config set dimp service status enabled

5a. To deactivate it:

config setprop dimp status disabled

6. To make these changes take effect:

signal-event email-update

7. Enable webmail access in the server-manager Email panel (if not already done)

8. Open https://your.server/webmail/horde/mimp with a webbrowser or more simply https://yourserver/webmail

9. Log in as admin (first to Horde, then to Dimp) and configure email settings. Logout.

10. Connect your mail client to "your.domain/horde/dimp" or "your.domain/webmail (Horde will present you with options to choose the standard Imp or the dynamic Dimp, & if you also have Mimp installed, the Minimalistic option will also be presented). Refer to the Mimp Contrib wiki article at http://wiki.contribs.org/Mimp

Check installed version

yum info installed *dimp*

That will show both packages.

Uninstall

yum remove *dimp*

Check spec (when asked) that no unintended packages have been included for removal. Only dimp & smeserver-dimp should be removed.

Additional information

Dimp website

More tips about email in this HowTo: Email

If you connect to the SME Server console by Putty ssh-client (or similar) you can copy and paste the commands (very convenient).

Bugs

Please raise bugs under the SME-Contribs section in bugzilla and select the smeserver-dimp component or use this link .

"No open bugs found."
"No open bugs found."

Tested software version

Host: SME Server v9.0beta3 (el5 versions of rpms), v8.0, v7.1 onwards

Current versions in SME 8 smecontribs repository at 18 February 2014

dimp-h3-1.1.6-1.el5.sme.noarch.rpm

smeserver-dimp-1.0-2.el5.sme.noarch.rpm