Difference between revisions of "Clamav:freshclam update"

From SME Server
Jump to navigationJump to search
(Created page with "Sometime you can have clamav errors who ask to download some files as below, The admin account can receive a lot of emails when clamav try to update its database. 2013-03-02...")
 
Line 62: Line 62:
  
 
For completeness & to be absolutely sure signal-event post-update; signal-event reboot, then go through the logs post reboot to make sure everything started correctly.  This is not necessary for this procedure but doesn't hurt.
 
For completeness & to be absolutely sure signal-event post-update; signal-event reboot, then go through the logs post reboot to make sure everything started correctly.  This is not necessary for this procedure but doesn't hurt.
 +
 +
[[Category:Howto]]

Revision as of 21:20, 10 March 2013

Sometime you can have clamav errors who ask to download some files as below, The admin account can receive a lot of emails when clamav try to update its database.

2013-03-02 22:57:11.757539500 ClamAV update process started at Sat Mar  2 22:57:11 2013
2013-03-02 22:57:31.922779500 WARNING: Can't query current.cvd.clamav.net
2013-03-02 22:57:31.922783500 WARNING: Invalid DNS reply. Falling back to HTTP mode.
2013-03-02 22:57:31.923493500 Reading CVD header (main.cvd): ERROR: Can't get information about database.clamav.net: Temporary failure in name resolution
2013-03-02 22:58:52.561344500 WARNING: Can't read main.cvd header from database.clamav.net (IP: )
2013-03-02 22:58:52.561855500 Giving up on database.clamav.net...
2013-03-02 22:58:52.561968500 Update failed. Your network may be down or none of the mirrors listed in /etc/freshclam.conf is working. Check http://www.clamav.net/support/mirror-problem for possible reasons.

This is a workaround to have a new database without complaints of clamav. use a root terminal to perform these commands.

Shutdown clam so clamd.socket file is removed

service clamd stop

Navigate to clamav folder

cd /var/clamav

Remove ALL files from folder to provide clean slate for update process

rm -f /var/clamav/* (you could skip the -f & confirm every file delete for safety)

Current Clamav version is clamav-0.97.6

rpm -q clamav

clamav-0.97.6-1.el5.rf

Update clamav to latest version if required it will Not downloading clamav-db

yum update clamav

Restart clam

service clamd start

Update sigs

freshclam -v (--no-dns can be used if just -v fails tho I haven't struck this issue)
Check output from freshclam to make sure update completes sucessfully.
Current working dir is /var/clamav
Max retries == 6
ClamAV update process started at Sun Feb 24 15:14:02 2013
Using IPv6 aware code
Querying current.cvd.clamav.net
TTL: 900
Software version from DNS: 0.97.6
main.cvd version from DNS: 54
main.cvd is up to date (version: 54, sigs: 1044387, f-level: 60, builder: sven)
daily.cvd version from DNS: 16731
daily.cld is up to date (version: 16731, sigs: 829102, f-level: 63, builder: guitar)
bytecode.cvd version from DNS: 214
bytecode.cvd is up to date (version: 214, sigs: 41, f-level: 63, builder: neo)

which showed as just 5 files in the /var/clamav folder:

ls -la /var/clamav
-rw-r--r--  1 clamav clamav    60125 Feb 17 12:11 bytecode.cvd
srw-rw-rw-  1 clamav clamav        0 Feb 24 14:27 clamd.socket
-rw-r--r--  1 clamav clamav 52101120 Feb 24 11:46 daily.cld
-rw-r--r--  1 clamav clamav 30750647 Oct 11  2011 main.cvd
-rw-------  1 clamav clamav      104 Feb 24 14:46 mirrors.dat


Important.png Note:
if you are bandwidth poor or on slow connection then don't delete main.cvd


For completeness & to be absolutely sure signal-event post-update; signal-event reboot, then go through the logs post reboot to make sure everything started correctly. This is not necessary for this procedure but doesn't hurt.