Changes

From SME Server
Jump to navigationJump to search
22 bytes removed ,  12:35, 24 September 2007
m
Modified to general wiki layout
Line 36: Line 36:  
====Formatting your USB drive====
 
====Formatting your USB drive====
 
=====ext3=====
 
=====ext3=====
Copied with slight changes from [[Affa#Alternatively_setup_a_USB_drive]]
+
<ol></li><li>Copied with slight changes from [[Affa#Alternatively_setup_a_USB_drive]]
# Connect a USB hard disk to the USB Bus. Now you must determine what device the kernel has assigned to the drive. View the /var/log/message and search for ''Initializing USB Mass Storage driver''. A few lines below you'll find the name of the device. In this example it is ''sdc''. Replace ''/dev/sdc'' by ''your device'' in following instructions.
+
</li><li>Connect a USB hard disk to the USB Bus. Now you must determine what device the kernel has assigned to the drive. View the /var/log/message and search for ''Initializing USB Mass Storage driver''. A few lines below you'll find the name of the device. In this example it is ''sdc''. Replace ''/dev/sdc'' by ''your device'' in following instructions.
# Use the fdisk program to create a linux partition<br><code># fdisk /dev/sdc</code><br>You'll most likely find an existing vfat dos partition, which you have to delete first. In the following we assume, that you have created a single partition ''/dev/sdc1''.
+
Use the fdisk program to create a linux partition
# Now format the drive with an ext3 filesystem<br><code>mkfs.ext3 -L MyLabel /dev/sdc1</code>
+
fdisk /dev/sdc
# Make the mount point<br><code># mkdir -p /mnt/affadevice</code>
+
You'll most likely find an existing vfat dos partition, which you have to delete first. In the following we assume, that you have created a single partition ''/dev/sdc1''.
# Customize /etc/fstab as shown here: [[USBDisks#Customizing_fstab|Customizing fstab]]
+
</li><li>Now format the drive with an ext3 filesystem
# Mount the drive<br><code>mount /mnt/affadevice</code>
+
mkfs.ext3 -L MyLabel /dev/sdc1
# Crosscheck your work using the df command<br><code># df</code>
+
</li><li>Make the mount point
 +
mkdir -p /mnt/affadevice
 +
</li><li>Customize /etc/fstab as shown here: [[USBDisks#Customizing_fstab|Customizing fstab]]
 +
</li><li>Mount the drive
 +
mount /mnt/affadevice
 +
</li><li>Crosscheck your work using the df command
 +
df</li></ol>
    
=====vfat=====
 
=====vfat=====

Navigation menu