371
edits
Changes
From SME Server
Jump to navigationJump to search
mLine 38:
Line 38: − + − + − + − + − + Line 104:
Line 104: − + − + − + − + − + − + Line 290:
Line 290: − + − https://wiki.koozali.org/Thinclient+ − + − − There is also a distro called [https://sourceforge.net/projects/thinstation/ Thinstation] This PXE it's own Linux distro that can be used a thin client. Line 305:
Line 303: − +
→Installation
signal-event reboot
signal-event reboot
The tftpd status is controlled via the Thin Clients server-manager panel if you have installed my [[Thinclient|smeserver-thinclient]] contrib.
The tftp status can be controlled via the Thin Clients server-manager panel if you have installed my [[Thinclient|smeserver-thinclient]] contrib.
If you haven't, you'll need to enable the tftp server
If you haven't, you'll need to enable the tftp server manually from the shell (logged in as root)
config setprop tftpd status enabled
config setprop tftp status enabled
signal-event tftpd-conf
signal-event smeserver-tftp-server-update
If for any reason the tftp server isn't running, try:
If for any reason the tftp server isn't running, try:
service tftpd restart
service tftp restart
=== Defaults ===
=== Defaults ===
These settings can be set/changed via
These settings can be set/changed via
config setprop tftpd <prop> <value>
config setprop tftp <prop> <value>
signal-event tftpd-conf
signal-event smeserver-tftp-server-update
<nowiki>*1</nowiki> blksize does not have a default entry in the configuration database. It can be added as above or removed via
<nowiki>*1</nowiki> blksize does not have a default entry in the configuration database. It can be added as above or removed via
see Bug 10646 for updated tftp contrib with addition of default setting
see Bug 10646 for updated tftp contrib with addition of default setting
config delprop tftpd blksize
config delprop tftp blksize
signal-event tftpd-conf
signal-event smeserver-tftp-server-update
<nowiki>*2</nowiki> refuse does not have a default entry in the configuration database. It can be added as above or removed via
<nowiki>*2</nowiki> refuse does not have a default entry in the configuration database. It can be added as above or removed via
config delprop tftpd refuse
config delprop tftp refuse
signal-event tftpd-conf
signal-event smeserver-tftp-server-update
===Setup PXE Booting===
===Setup PXE Booting===
Most Voip phone scan read a config file based on their MAC address to configure themselves during boot.
Most Voip phone scan read a config file based on their MAC address to configure themselves during boot.
This can takea while to set up but is a massive time saver.
This can take a while to set up but is a massive time saver.
===Related Contribs===
===Related Contribs===
[[Thinclient|smeserver-thinclient]]
This can aid with basic tftpd setup.
This can aid with basic tftp setup.
=== Uninstall ===
=== Uninstall ===
If you want to fully clean up, by removing the entries from the configuration database
If you want to fully clean up, by removing the entries from the configuration database
config delete tftpd
config delete tftp
=== Source ===
=== Source ===
