Changes

From SME Server
Jump to navigationJump to search

SME Server:Documentation:Administration Manual:Chapter4 (view source)

Revision as of 21:12, 16 April 2021

33 bytes added ,  21:12, 16 April 2021
→‎4.3. Hard Drive Configuration
Line 100: Line 100:  
For default RAID configuration options as chosen by the installer, please see here: [[https://wiki.koozali.org/Raid#Default_RAID_Rationale|Defulat RAID settings]]
 
For default RAID configuration options as chosen by the installer, please see here: [[https://wiki.koozali.org/Raid#Default_RAID_Rationale|Defulat RAID settings]]
   −
Do please note that the installer expects drives to be empty. Previously used drives should be wiped: this is sometimes tricky depending on which operating system was previously installed.
+
Do please note that the installer expects drives to be empty. Previously used drives should be wiped before being used for an install: this is sometimes tricky depending on which operating system was previously installed.
    
====4.4. Supported Ethernet or SCSI Adapters, or Tape Drives====
 
====4.4. Supported Ethernet or SCSI Adapters, or Tape Drives====
Retrieved from "https://wiki.koozali.org/Special:MobileDiff/39731"

Navigation menu