653
edits
Changes
From SME Server
Jump to navigationJump to searchSME Server:Documentation:Administration Manual:Chapter4 (view source)
Revision as of 21:02, 16 April 2021
, 21:02, 16 April 2021→4.3. Hard Drive Configuration
{{Note box| SME Server 9 differs from SME server 8.1 in that the default install will only configure a Raid 1 configuration regardless of the number of hard drives available. There are selectable install options for other Raid configurations available from the install menu when sufficient hard drives are installed to support that Raid config}}-->
{{Note box| SME Server 9 differs from SME server 8.1 in that the default install will only configure a Raid 1 configuration regardless of the number of hard drives available. There are selectable install options for other Raid configurations available from the install menu when sufficient hard drives are installed to support that Raid config}}-->
For default RAID configuration options as chosen by the installer, please see here: #REDIRECT [[https://wiki.koozali.org/Raid#Default_RAID_Rationale]]
Do please note that the installer expects drives to be empty. Previously used drives shoudl be wiped: this is sometimes tricky depending on which operating system was previously installed.
====4.4. Supported Ethernet or SCSI Adapters, or Tape Drives====
====4.4. Supported Ethernet or SCSI Adapters, or Tape Drives====
