Changes

From SME Server
Jump to navigationJump to search

Uninterruptable Power Supply:APC (view source)

Revision as of 13:40, 16 November 2020

61 bytes added ,  13:40, 16 November 2020
m
→‎Introduction: formatting only
Line 1: Line 1:  
{{Level|Medium}}
 
{{Level|Medium}}
−
==Installation of apcupsd==
+
==Installation of APCUPSd==
 
===Introduction===
 
===Introduction===
−
Apcupsd can be used for power management and controlling most of APC's UPS models on Unix and Windows machines. Apcupsd works with most of APC's Smart-UPS models as well as most simple signalling models such a Back-UPS, and BackUPS-Office. During a power failure, apcupsd will inform the users about the power failure and that a shutdown may occur. If power is not restored, a system shutdown will follow when the battery is exhausted, a timeout (seconds) expires, or runtime expires based on internal APC calculations determined by power consumption rates. Apcupsd is licensed under the GPL version 2.  
+
APCUPSd can be used for power management and controlling most of APC's UPS models on Unix and Windows machines. APCUPSd works with most of APC's Smart-UPS models as well as most simple signalling models such a Back-UPS, and BackUPS-Office. During a power failure, APCUPSd will inform the users about the power failure and that a shutdown may occur. If power is not restored, a system shutdown will follow when the battery is exhausted, a timeout (seconds) expires, or runtime expires based on internal APC calculations determined by power consumption rates. APCUPSd is licensed under the GPL version 2.  
   −
The latest version of ''apcupsd'' is 3.14.10-1 (2011-10-04) and is available from sourceforge in two rpms - one for the UPS daemon and one for the web based monitoring scripts. Neither of these install exactly in line with the ''SME way'', and neither does the older version available on DAG.
+
The latest version of ''APCUPSd'' is 3.14.10-1 (2011-10-04) and is available from sourceforge in two rpms - one for the UPS daemon and one for the web based monitoring scripts. Neither of these install exactly in line with the ''SME way'', and neither does the older version available on DAG.
−
 
  −
These installation instructions make some additional modifications for SME. They have been tested on:
  −
- SME 7.5 and an APC SmartUPS 1500i with both a usb and a 940-0024C smart serial cable.
  −
- SME 7.5.1 and an APC BackUPS BR800 with a usb cable.
  −
- AP9617 Network Management Card using both the ''snmp'' and ''pcnet'' UPSTYPE drivers'
      +
These installation instructions make some additional modifications for SME. They have been tested on: <nowiki><br></nowiki>
 +
* SME 7.5 and an APC SmartUPS 1500i with both a usb and a 940-0024C smart serial cable. <nowiki><br></nowiki>
 +
* SME 7.5.1 and an APC BackUPS BR800 with a usb cable.<nowiki><br></nowiki>
 +
* AP9617 Network Management Card using both the ''snmp'' and ''pcnet'' UPSTYPE drivers'
 
{{Note box|SME uses Nut as standard for UPS monitoring and control and works with more than just APC UPS models. See [[Uninterruptable_Power_Supply]] for details }}
 
{{Note box|SME uses Nut as standard for UPS monitoring and control and works with more than just APC UPS models. See [[Uninterruptable_Power_Supply]] for details }}
 
===Download and install===
 
===Download and install===
Line 21: Line 20:  
  yum localinstall apcupsd-3.14.10-1.el5.x86_64.rpm apcupsd-multimon-3.14.10-1.el5.x86_64.rpm
 
  yum localinstall apcupsd-3.14.10-1.el5.x86_64.rpm apcupsd-multimon-3.14.10-1.el5.x86_64.rpm
   −
===Configure apcupsd===
+
===Configure APCUPSd===
 
====General====
 
====General====
 
Link the startup file and enable the service
 
Link the startup file and enable the service
Line 286: Line 285:  
See [[Uninterruptable_Power_Supply]] for standard SME use of ''Nut'' for UPS monitoring
 
See [[Uninterruptable_Power_Supply]] for standard SME use of ''Nut'' for UPS monitoring
   −
See original forum [http://forums.contribs.org/index.php?topic=45923.0 post ]
+
See original forum [http://forums.contribs.org/index.php?topic=45923.0 post]
 
----
 
----
 
===Original Instructions (DAG)===
 
===Original Instructions (DAG)===
Jader
147

edits

Retrieved from "https://wiki.koozali.org/Special:MobileDiff/38930"

Navigation menu