Changes

  yum --enablerepo=smecontribs --enablerepo=base install smeserver-tftp-server

  yum --enablerepo=smecontribs --enablerepo=base install smeserver-tftp-server

Officially you should then need to apply the database changes etc., but this is not required for this package.

Officially you should then need to apply the database changes etc. Whilst this is not required to be able to run the tftp server straight away, it will be required at some stage, and the server manager will remind you, until you do.

  signal-event post-upgrade

  signal-event post-upgrade

The tftpd status is controlled via the Thin Clients server-manager panel if you have installed my [[Thinclient|smeserver-thinclient]] contrib.

The tftpd status is controlled via the Thin Clients server-manager panel if you have installed my [[Thinclient|smeserver-thinclient]] contrib.

If you haven't, you'll need to enable the tftp server and expand all the templates etc.

If you haven't, you'll need to enable the tftp server

  config setprop tftpd status enabled

  config setprop tftpd status enabled

  signal-event tftpd-conf

  signal-event tftpd-conf

If for any reason the tftp server isn't running, try:

If for any reason the tftp server isn't running, try:

  /etc/init.d/supervise/tftpd restart

  service tftpd restart

=== Defaults ===

=== Defaults ===