Changes

       <pre>signal-event post-upgrade

       <pre>signal-event post-upgrade

signal-event reboot</pre>

signal-event reboot</pre>

   <li value="8">Change your kernel boot options

   <li value="8">Change your kernel boot options.<br/>

      Optionally, for best results with SME 8.x and earlier versions, modify /etc/grub.conf, adding divider=10 to the kernel boot options in order

Optionally, for best results with SME 8.x and earlier versions, modify /etc/grub.conf, adding divider=10 to the kernel boot options in order

to reduce the idle CPU load with VirtualBox. For example, if your kernel boot line is

to reduce the idle CPU load with VirtualBox. For example, if your kernel boot line is

       <pre>kernel /vmlinuz-2.6.18-238.19.1.el5 ro root=/dev/main/root</pre>

       <pre>kernel /vmlinuz-2.6.18-238.19.1.el5 ro root=/dev/main/root </pre>

       change it to

       <p>change it to</p>

       <pre>kernel /vmlinuz-2.6.18-238.19.1.el5 ro root=/dev/main/root divider=10</pre>

       <pre>kernel /vmlinuz-2.6.18-238.19.1.el5 ro root=/dev/main/root divider=10</pre>

<b>Reminder: if you subsequently update SME Server to use a newer kernel, you may need to change

      <b>Reminder:</b> if you subsequently update SME Server to use a newer kernel, you may need to change

your kernel boot line to reflect the update.</b>

your kernel boot line to reflect the update.

   </li>

   </li>

   <li value="9">Create a symbolic link</li>

   <li value="9">Create a symbolic link.<br/>

       <b>NOTE: Be careful if you cut-and-paste the command below. In some terminal windows, from some browsers, the parts of the command in

       <b>NOTE:</b> Be careful if you cut-and-paste the command below. In some terminal windows, from some browsers, the parts of the command in

bold font do not paste correctly. Pay particular attention to the dashes (-) and the backticks (`). There aren't any single quote marks in

bold font do not paste correctly. Pay particular attention to the dashes (-) and the backticks (`). There aren't any single quote marks in

the command below - they are all supposed to be backticks.</b>

the command below - they are all supposed to be backticks.

 

     <pre>ln '''-s''' /usr/src/kernels/'''`uname -r`'''-'''`uname -m`''' /lib/modules/'''`uname -r`'''/build</pre>

     <pre>ln <b>-s</b> /usr/src/kernels/<b>`uname -r`</b>-<b>`uname -m`</b> /lib/modules/<b>`uname -r`</b>/build</pre>

      

      

     <b>Reminder: if you subsequently update SME Server to use a newer kernel, you may need to recreate the symbolic link.</b>

     <b>Reminder:</b> if you subsequently update SME Server to use a newer kernel, you may need to recreate the symbolic link.

 

  </li>

   <li value="10">Check that the symbolic link was properly created by doing a directory listing.</li>

   <li value="10">Check that the symbolic link was properly created by doing a directory listing.<br/>

       <b>NOTE: Be careful if you cut-and-paste the command below. In some terminal windows, from some browsers, the parts of the command in

       <b>NOTE:</b> Be careful if you cut-and-paste the command below. In some terminal windows, from some browsers, the parts of the command in

bold font do not paste correctly. Pay particular attention to the dashes (-) and the backticks (`). There aren't any single quote marks in

bold font do not paste correctly. Pay particular attention to the dashes (-) and the backticks (`). There aren't any single quote marks in

the command below - they are all supposed to be backticks.</b>

the command below - they are all supposed to be backticks.

 

   <li value="11">Install the Fedora Epel repository using the instructions [http://wiki.contribs.org/Epel here].</li>

   <li value="11">Install the Fedora Epel repository using the instructions [http://wiki.contribs.org/Epel here].</li>

   <li value="12">Install Dynamic Kernel Module Support (DKMS)</li>

   <li value="12">Install Dynamic Kernel Module Support (DKMS)</li>