Changes

From SME Server
Jump to navigationJump to search

IAXModem with Sail and HylaFax (view source)

Revision as of 00:44, 16 January 2010

121 bytes added ,  00:44, 16 January 2010
no edit summary
Line 3: Line 3:  
No other asterisk implementations have been used or tested.  
 
No other asterisk implementations have been used or tested.  
 
It is assumed that you have a working Sail/asterisk installation}}
 
It is assumed that you have a working Sail/asterisk installation}}
 +
==IAXModem for SME Server==
 +
{{Level|Medium}}
    
==Introduction==
 
==Introduction==
Line 93: Line 95:  
==HylaFax==
 
==HylaFax==
 
Install the [[HylaFax|smeserver-hylafax]] contrib.
 
Install the [[HylaFax|smeserver-hylafax]] contrib.
−
When you run faxsetup, at the end it will ask to continue and run faxaddmodem to setup a modem. Choose ttyIAX as the modem port and continue and set other values as required. Do not reboot or start HylaFax yet.
+
When you run faxsetup, at the end it will ask to continue and run faxaddmodem to setup a modem.  
 +
Enter 'ttyIAX' as the modem port and continue and set other values as required. The IAXModem should be discovered if it was working OK as above.
 +
Do not reboot or start HylaFax yet.
 
Edit /etc/hylafax/etc/config.ttyIAX and add
 
Edit /etc/hylafax/etc/config.ttyIAX and add
 
  ModemDialCmd:        ATDT99%s
 
  ModemDialCmd:        ATDT99%s
−
This will prefix all numbers dialled by HylaFax with 99 so they can be identified and routed by SAIL
+
{{Note box|This will prefix all numbers dialled by HylaFax with 99 so they can be identified and routed by SAIL}}
 
Also check
 
Also check
 
  # make attachments readable
 
  # make attachments readable
Line 185: Line 189:  
   
 
   
 
  exit $RETVAL
 
  exit $RETVAL
−
  −
  −
  −
         
----
 
----
Retrieved from "https://wiki.koozali.org/Special:MobileDiff/14005"

Navigation menu