Changes

===Global Settings===

===Global Settings===

In ''Global Settings''

In ''Global Settings''

*Make sure that 'Late Termination' is set to No.

*Make sure that ''Late Termination'' is set to 'No'.

*Make sure that the 'Autosense FAX Extension' is set to a number you want to use for the Fax. You will need this number later.

*Make sure that the ''Autosense FAX Extension'' is set to a number you want to use for the Fax. You will need this number later.

*The 'Fax Delay' setting defaults to 2 seconds. You may need to adjust this later to make sure faxes get detected before asterisk attempts to terminate somewhere other than the FAX.  

*The ''Fax Delay'' setting defaults to 2 seconds. You may need to adjust this later to make sure faxes get detected before asterisk attempts to terminate somewhere other than the FAX.  

===Trunklines===

===Trunklines===

For each Trunk under ''Trunklines'' that you want to be able to detect incoming Faxes on

For each Trunk under ''Trunklines'' that you want to be able to detect incoming Faxes on

*Make sure that the 'Fax' detection tick box is ticked

*Make sure that the ''Fax'' detection tick box is ticked

*Include a 'Transformation String' of

*Include a ''Transformation String'' of

  99:

  99:

{{Note box|We will configure HylaFax later to prefix dialled numbers with 99 so we can identify them as an outgoing fax and route them as desired.

{{Note box|We will configure HylaFax later to prefix dialled numbers with 99 so we can identify them as an outgoing fax and route them as desired.

Create a new Route for faxes with dialplan(s) starting with 99.  

Create a new Route for faxes with dialplan(s) starting with 99.  

  example: 99X.

  example: 99X.

and with Paths pointing to the Trunks on which you wish to receive faxes - those with 'Fax' detection ticked as above

and with ''Paths'' pointing to the Trunks on which you wish to receive faxes - those with ''Fax'' detection ticked as above

===Fax Extension===

===Fax Extension===

Create a new Extension with the same number as set in the 'Autosense FAX Extension' as above. The 'Device' should be IAXModem.

Create a new Extension with the same number as set in the ''Autosense FAX Extension'' as above. The ''Device'' should be 'IAXModem'.

{{Note box|We will assume an extension number of 2000, a password (secret) of asterisk and a Display Name of FaxModem}}

{{Note box|We will assume an ''Extension Number'' of '2000', a ''Password'' (secret) of 'asterisk' and a ''Display Name'' of 'FaxModem'}}

Once created check the stanza generally conforms to the following and change as necessary:

Once created check the stanza generally conforms to the following and change as necessary:

  [2000]

  [2000]