19
edits
Changes
From SME Server
Jump to navigationJump to searchAddExtraHardDisk - SCSI (view source)
Revision as of 08:30, 7 December 2008
, 08:30, 7 December 2008no edit summary
md: raid1 personality registered as nr 3
md: raid1 personality registered as nr 3
md: md1 stopped.
md: md1 stopped.
md: bind<cciss/c1d0p1>
md: bind<cciss/c0d0p1>
raid1: raid set md1 active with 1 out of 2 mirrors
raid1: raid set md1 active with 1 out of 2 mirrors
md: md2 stopped.
md: md2 stopped.
md: bind<cciss/c1d0p2>
md: bind<cciss/c0d0p2>
raid1: raid set md2 active with 1 out of 2 mirrors
raid1: raid set md2 active with 1 out of 2 mirrors
md: Autodetecting RAID arrays.
md: Autodetecting RAID arrays.
md: could not bd_claim cciss/c1d0p1.
md: could not bd_claim cciss/c0d0p1.
md: could not bd_claim cciss/c1d0p2.
md: could not bd_claim cciss/c0d0p2.
md: autorun ...
md: autorun ...
md: ... autorun DONE.
md: ... autorun DONE.
Info I needed was:
Info I needed was:
md: bind<cciss/c1d0p1>
md: bind<cciss/c0d0p1>
md: bind<cciss/c1d0p2>
md: bind<cciss/c0d0p2>
This tells me that I currently have 2 active partitions, p1 & p2, on drive c1d0
This tells me that I currently have 2 active partitions, p1 & p2, on drive c0d0 (controller 0, disk 0); if a secondary controller was added or used it would therefore be c1d0 (controller 1, disk 0).
Logically my new drive should be on c1d1, & the linux device file to match should be in /dev/cciss, so:
Logically my new drive should be on c0d1, & the linux device file to match should be in /dev/cciss, so:
fdisk /dev/cciss/c1d1 (use ? or m to get help)
fdisk /dev/cciss/c0d1 (use ? or m to get help)
Follow the prompts to add a Linux partition
Follow the prompts to add a Linux partition
Lets see if we have a partition to work with:
Lets see if we have a partition to work with:
fdisk -l /dev/cciss/c1d1
fdisk -l /dev/cciss/c0d1
Disk /dev/cciss/c1d1: 299.9 GB, 299992412160 bytes
Disk /dev/cciss/c0d1: 299.9 GB, 299992412160 bytes
255 heads, 63 sectors/track, 36472 cylinders
255 heads, 63 sectors/track, 36472 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Device Boot Start End Blocks Id System
/dev/cciss/c1d1p1 1 36472 292961308+ 83 Linux
/dev/cciss/c0d1p1 1 36472 292961308+ 83 Linux
Yup, cool, p1 is partition 1 on device c1d1
Yup, cool, p1 is partition 1 on device c0d1
I don't want to add it to lvm to as it helps to make it more portable for me so this is all I need, your requirements may differ.
I don't want to add it to lvm to as it helps to make it more portable for me so this is all I need, your requirements may differ.
Create filesystem & journal on device
Create filesystem & journal on device
mkfs.ext3 -j /dev/cciss/c1d1p1
mkfs.ext3 -j /dev/cciss/c0d1p1
=== 3 Mount ===
=== 3 Mount ===
/dev/md1 101018 27580 68222 29% /boot
/dev/md1 101018 27580 68222 29% /boot
none 1980264 0 1980264 0% /dev/shm
none 1980264 0 1980264 0% /dev/shm
/dev/cciss/c1d1p1 288362876 98368 273616444 1% /mnt/backupdrive
/dev/cciss/c0d1p1 288362876 98368 273616444 1% /mnt/backupdrive
If you don't see a line for /dev/cciss/c1d1p1, something went wrong.
If you don't see a line for /dev/cciss/c0d1p1, something went wrong.
<br>Go back to step 2 and check if you followed all instructions correctly.
<br>Go back to step 2 and check if you followed all instructions correctly.
