Changes

From SME Server
Jump to navigationJump to search
m
*NVIDIA chipset with integrated ethernet
Line 161: Line 161:  
*Losing too many ticks*
 
*Losing too many ticks*
 
A kernel bug with Athlon64 processors may cause the system to run slowly, possibly fixed with a later kernel
 
A kernel bug with Athlon64 processors may cause the system to run slowly, possibly fixed with a later kernel
 +
    
*VGA problem with VIA EPIA board*
 
*VGA problem with VIA EPIA board*
 
Once the installer loads the VGA display loses sync and it is impossible to read what is being displayed. There is a workaround, see this bug report for details: [[ Bugzilla:236 ]]
 
Once the installer loads the VGA display loses sync and it is impossible to read what is being displayed. There is a workaround, see this bug report for details: [[ Bugzilla:236 ]]
 
    
 
    
 +
 
*Slow Disk Format*
 
*Slow Disk Format*
 
Installing 2 discs as Primary and Secondary on the same IDE channel may cause
 
Installing 2 discs as Primary and Secondary on the same IDE channel may cause
Line 181: Line 183:  
[[http://sourceforge.net/tracker/index.php?func=detail&aid=1359597&group_id=96750&atid=615772]]
 
[[http://sourceforge.net/tracker/index.php?func=detail&aid=1359597&group_id=96750&atid=615772]]
 
[[https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=154349]]
 
[[https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=154349]]
 +
    
*Boot failure after install if you have enabled hardware raid
 
*Boot failure after install if you have enabled hardware raid
Line 186: Line 189:  
[[https://sourceforge.net/tracker/index.php?func=detail&aid=1286560&group_id=96750&atid=615772]]
 
[[https://sourceforge.net/tracker/index.php?func=detail&aid=1286560&group_id=96750&atid=615772]]
 
[[https://sourceforge.net/tracker/index.php?func=detail&aid=1304784&group_id=96750&atid=615772]]
 
[[https://sourceforge.net/tracker/index.php?func=detail&aid=1304784&group_id=96750&atid=615772]]
 +
    
*Realtek 8169 Ethernet is not recommended*
 
*Realtek 8169 Ethernet is not recommended*
 
The driver included in ~CentOS 4.1 is out of date and has problems. See this bug listing for details, and please update the bug if you have a solution (i. e. updated drivers):  
 
The driver included in ~CentOS 4.1 is out of date and has problems. See this bug listing for details, and please update the bug if you have a solution (i. e. updated drivers):  
 
[[https://sourceforge.net/tracker/index.php?func=detail&aid=1293290&group_id=96750&atid=615772]]
 
[[https://sourceforge.net/tracker/index.php?func=detail&aid=1293290&group_id=96750&atid=615772]]
 +
    
*3com 905 (Cyclone) Ethernet is not recommended*
 
*3com 905 (Cyclone) Ethernet is not recommended*
 
This card is not detected
 
This card is not detected
 +
 +
 +
*NVIDIA chipset with integrated ethernet is not recommended*
 +
The ethernet device is recognized, and the right driver found, but it's
 +
marked as a "Bridge", not as a network device.
 +
    
*Booting in SMP mode results in kernel panic with certain hardware
 
*Booting in SMP mode results in kernel panic with certain hardware
Line 198: Line 209:  
[[https://sourceforge.net/tracker/?func=detail&atid=615772&aid=1325350&group_id=96750]]
 
[[https://sourceforge.net/tracker/?func=detail&atid=615772&aid=1325350&group_id=96750]]
 
    
 
    
 +
 
*Legacy ~MegaRAID driver is no longer included
 
*Legacy ~MegaRAID driver is no longer included
 
Certain raid cards that worked under SME Server 6, do not work under SME Server 7. Adapters with the following PCI vendor ID and device ID pairs are not supported by the megaraid_mbox driver: vendor, device = 0x101E, 0x9010; 0x101E, 0x9060; 0x8086, 0x1960. The lspci -n command can be used to display the IDs for adapters installed in a particular machine. Products with these IDs are known by (but not limited to) the following model names:  Broadcom 5820, Dell PERC (dual-channel fast/wide SCSI) RAID controller, Dell PERC2/SC (single-channel Ultra SCSI) RAID controller, Dell PERC2/DC (dual-channel Ultra SCSI) RAID controller, Dell CERC (four-channel ATA/100) RAID controller, DRAC 1, ~MegaRAID 428, ~MegaRAID 466, ~MegaRAID Express 500, HP NetRAID 3Si and 1M.  Both Dell and LSI Logic have indicated that they no longer support these models in the 2.6 kernel. As a result, these adapters are no longer supported in Red Hat Enterprise Linux 4 Update 1, upon which SME Server 7 is based. See this bug listing for details, there is an unsupported workaround if needed:  
 
Certain raid cards that worked under SME Server 6, do not work under SME Server 7. Adapters with the following PCI vendor ID and device ID pairs are not supported by the megaraid_mbox driver: vendor, device = 0x101E, 0x9010; 0x101E, 0x9060; 0x8086, 0x1960. The lspci -n command can be used to display the IDs for adapters installed in a particular machine. Products with these IDs are known by (but not limited to) the following model names:  Broadcom 5820, Dell PERC (dual-channel fast/wide SCSI) RAID controller, Dell PERC2/SC (single-channel Ultra SCSI) RAID controller, Dell PERC2/DC (dual-channel Ultra SCSI) RAID controller, Dell CERC (four-channel ATA/100) RAID controller, DRAC 1, ~MegaRAID 428, ~MegaRAID 466, ~MegaRAID Express 500, HP NetRAID 3Si and 1M.  Both Dell and LSI Logic have indicated that they no longer support these models in the 2.6 kernel. As a result, these adapters are no longer supported in Red Hat Enterprise Linux 4 Update 1, upon which SME Server 7 is based. See this bug listing for details, there is an unsupported workaround if needed:  

Navigation menu