Migratehelper

From SME Server
Jump to navigationJump to search





migratehelper
NeedImage.svg
migratehelper logo
Maintainer[[user:Jean-Philippe Pialasse|Jean-Philippe Pialasse]]
Urlhttps://wiki.contribs.org
LicenceGPL
Category

Category you want

Tags backuprestorecontribs


Maintainer

Jean-Philippe Pialasse

Version

Contrib 10:
smeserver-migratehelper
The latest version of smeserver-migratehelper is available in the SME repository, click on the version number(s) for more information.


Description

This is a script intended to help backup and restore when migrating to another box with the same SME version or newer.

It will create an archive similar to the console usb backup, hence allowing console restore at startup directly after install.

It will backup all the known configurations and files for every installed contribs.

It will also backup some user space known to potentially have manually added files.

It will create a list of rpm currently installed and break them down to ease the install later.

A WIP will be to download the rpms from the repos to allow quick reinstall. Another script will be used later to allow download from a more recent version.

There is also an exclusion list. By default /home/e-smith/files is in this exclusion list so you can have a faster server backup and restore. It assumes you backup those files separately and restore them manually later (or have them on a separate mount point you can easily remount latter), as the server can boot without them on install.


Installation

yum --enablerepo=smecontribs install smeserver-migratehelper

Usage and behaviour

You must first create the mount point and mount your external disk already formatted and with sufficient place to receive the archive:

mkdir /mnt/backup
mount /dev/mydisk /mnt/backup

You can then edit the script and Add your directories or files to include in the dir.list section, your exclusion in exclude.list section. Then check all your contribs are listed, and the associated destination are correct.

vim /usr/bin/migratehelper.sh

Then run the script.

Script Options

Usage: [ -t Enable Test mode ] [ -n no-check ] [ -v Version ] [ -h Help ]

test mode - does not stop services and run the backup no-check - don't stop and ask questions


Warning.png Warning:
When starting this script :

it will create the list of files to backup, then it will stop services that could modify your backup

  • qmail.service
  • qpsmtpd.service
  • sqpsmtpd.service
  • ejabberd.service
  • smb.service
  • smbd.service
  • nmbd.service
  • httpd-e-smith.service

Do a pre-backup event and then create the tar file in /mnt/backup/smeserver.tgz


/usr/bin/migratehelper.sh

It will then process all the files to backup and display the progress on screen. After creating the definitive list depending on installed rpms, it will then create a list of rpm installed and breakdown them in two easy to restore lists :

files description
/root/newrpms output of /sbin/e-smith/auditiools/newrpms
/root/contribs previous output filtered for smeserver-* rpms
/root/rpmsextra all other non base distro rpms.

Default backup list

note : we are excluding /home/e-smith/{files,shares} and /home/e-smith/db/mysql*/{daily,hourly}

/etc/e-smith/templates-custom
/etc/e-smith/templates-user-custom
/etc/group
/etc/gshadow
/etc/passwd
/etc/samba/secrets.tdb
/etc/samba/smbpasswd
/etc/shadow
/etc/smbpasswd
/etc/ssh
/etc/sudoers
/root
/home/e-smith/Maildir
/home/e-smith/home
/home/e-smith/ssl.crt
/home/e-smith/ssl.key
/home/e-smith/dkim_keys
/home/e-smith/db
/var/lib/dhcpd/dhcpd.leases
/var/log/qpsmtpd
/var/log/sqpsmtpd
/var/log/qmail
/var/log/httpd/
/var/log/dovecot/
/var/log/squid
/var/log/iptables/
/var/spool/mail/
/var/spool/spamd/
/var/log/samba/samba_audit
/var/service/qpsmtpd/config/dkimkeys/


also we add any non rpm owned files in

/usr/local/bin/
/etc/cron.*
/etc/udev/rules.d/

Default exclusions

Warning.png Warning:
When starting this script :

/home/e-smith/files /home/e-smith/shares are EXCLUDED by default, because we expect a huge amount of user data that you could rsync later after having your new server up and running, and kept the old one up. This will allow you to be up and running faster than waiting to gzip gigabyte of data, transfer them and ungzip them.


/home/e-smith/db/mysql/daily
/home/e-smith/db/mysql/hourly
/home/e-smith/db/mysql55/daily
/home/e-smith/db/mysql55/hourly
/home/e-smith/db/mysql57/daily
/home/e-smith/db/mysql57/hourly
/home/e-smith/files
/home/e-smith/shares
/etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/20LoadModule80PHP
/etc/e-smith/templates-custom/etc/hosts.allow/sshd
/etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/35SSL00Listen443
/etc/e-smith/templates-custom/etc/dhcpd.conf/25DomainNameServers
/etc/e-smith/templates-custom/etc/dhcpd.conf/25LeaseTimeDefault
/etc/e-smith/templates-custom/etc/dhcpd.conf/25LeaseTimeMax
/etc/e-smith/templates-custom/etc/dhcpd.conf/25Routers

Supported contribs

this is a list of currently configured and known contribs to save in the process. Please be aware that it is not exhaustive. Check if yours is in there, and check that all the needed files are included.

smeserver-awstats
smeserver-BackupPC4
smeserver-BackupPC
smeserver-bandwidthd
smeserver-clamav-unofficial-sigs
smeserver-dansguardian 
smeserver-dansguardian 
smeserver-dansguardian-panel
smeserver-denyhosts
smeserver-dl 
dokuwiki
smeserver-durep
smeserver-ezmlm-web
smeserver-freepbx
smeserver-fail2ban
smeserver-grr
ipasserelle-im
smeserver-isoqlog
smeserver-jappix
smeserver-lemonldap-ng
smeserver-letsencrypt
smeserver-limesurvey
ipasserelle-listes 
smeserver-madsonic
smeserver-mailman
smeserver-nextcloud
smeserver-ntop
smeserver-openvpn-bridge
smeserver-openvpn-routed
smeserver-openvpn-s2s
phpki
phpki-ng
smeserver-phpki
smeserver-phpki-ng
pydio
smeserver-sarg 
smeserver-sme8admin 
smeserver-sme9admin
smeserver-smeadmin
smeserver-softethervpn-server
smeserver-sysmon
smeserver-tftp-server
smeserver-transmission
smeserver-unifi
smeserver-xt_geoip
smeserver-webfilter
smeserver-webshares
smeserver-zabbix-agent 
smeserver-zabbix-proxy
smeserver-zabbix-server 
smeserver-zoneminder


Contribs that do not need any file backup:

  1. smeserver-bridge-interface
  2. smeserver-ddclient
  3. smeserver-email-management
  4. smeserver-geoip
  5. smeserver-kronolith
  6. smeserver-lazy_admin_tools
  7. smeserver-learn
  8. smeserver-mailsorting
  9. smeserver-mailstats
  10. smeserver-mediatomb
  11. smeserver-mod_dav
  12. smeserver-nag
  13. smeserver-php-fpm
  14. smeserver-php-scl
  15. smeserver-phpldapadmin.
  16. smeserver-phpsysinfo
  17. smeserver-qmHandle
  18. smeserver-remoteuseraccess
  19. smeserver-sane
  20. smeserver-usbdisksmanager
  21. smeserver-userpanel
  22. smeserver-userpanels
  23. smeserver-vacation
  24. smeserver-wbl
  25. smeserver-webapps-common
  26. smeserver-webhosting

Restore

First step will be to simply use the console restore with the obtained smeserver.tgz. We expect you handle the transfer either using a USB disk, or by having used sshfs and already mounted one extra partition of your new server to your old to create you archive on.

Second use the configuration console to fix any changes needed on network card or IP, domain name...

Third you can use the saved list of rpm to try to install your contribs and other missing things

 yum install --enablerepo=smecontribs `cat /root/contribs`
 yum install --enablerepo=smecontribs `cat /root/rpmsextra`

You can also enable the needed repo depending on what you would have : epel, fws, ....

Fourth, you can start a rsync for the missing bits

 rsync -aArv root@oldsme:/home/e-smith/files/ibays/ /home/e-smith/files/ibays
 rsync -aArv root@oldsme:/home/e-smith/files/shares/ /home/e-smith/files/shares
 rsync -aArv root@oldsme:/home/e-smith/files/users/ /home/e-smith/files/users
 rsync -aArv root@oldsme:/home/e-smith/files/nextcloud home/e-smith/files/nextcloud

or simply

  rsync -aArv root@oldsme:/home/e-smith/files/ /home/e-smith/files

Some might enjoy to get back their old log too

then you should be good to enjoy your new server....

Uninstall

yum remove smeserver-migratehelper

Issues

Certificate

If you experience issues with certificates

https://vault.centos.org/6.10/os/x86_64/repodata/repomd.xml: [Errno 14] Peer cert cannot be verified or peer cert invalid
cd /etc/yum.smerepos.d
nano sme-base.repo

Add this to the relevant sections:

sslverify=0

(Do not run yum-modify as it will overwrite this)

Save and then re-run the migratehelper.

Bugs

Please raise bugs under the SME-Contribs section in bugzilla and select the smeserver-migratehelper component or use this link


Below is an overview of the current issues for this contrib:

No open bugs found.

Changelog

Only released version in smecontrib are listed here.

smeserver-migratehelper Changelog: SME 10 (smecontribs)
2021/12/02 Jean-Philippe Pialasse 1.0-10.sme
- remove non existing standard path /home/e-smith/home
2021/11/14 John Crisp 1.0-9.sme
- Fix JPs typo
2021/11/14 John Crisp 1.0-8.sme
- fix mangled fail2ban conf backup lines
2021/11/14 John Crisp 1.0-7.sme
- remove debug line left by mistake

2021/10/29 John Crisp 1.0-6.sme
- add check/create for a /mnt/backup dir
- Fix typos
- Fix bash syntax errors via the IDE plugin

- Add some switches for help, test, no confirm