board, director
297
edits
Changes
Jump to navigation
Jump to search
Line 5:
Line 5: − − {{Note_box|msg=At this point, I'm just going to randomly ramble on this wiki page as I work on Samba 4. Once I get some workable pieces, I'll go back and format this page so that it makes more sense. - [[User:Gzartman|Gzartman]]}} Line 12:
Line 10: − + − − + − − + − + + − + + − + − − It should be noted that as of Samba 4.3, Sernet stopped providing packages for free. Samba 4.3+ sernet packages are commercial only. Therefore, we will only be able to provide support on SME 9+ through Samba 4.2 unless someone comes up with a solution to port Samba 4 + AD to Centos 6. The Sernet Samba packages up through Samba 4.2 work fine for providing Active Directory support on SME 9+. Given SME 10 is in Alpha, the lack of upstream support for Samba + AD on SME 9 likely won't be a big issue. − + − Line 47:
Line 42: − # config setprop smb legacy enabled − + + + + + + + + + + + + + + + + + + + + + Line 87:
Line 101: + − + − ==Template Fragments== − − ===/etc/smb.conf=== − Complete rewrite of all template fragments − − ====smb.conf Considerations==== − − The smb.conf configuration file can be simplified significantly for Samba 4. Of specific interest are the following new parameters: − − − '''Server Services:''' This parameter is not very well documented, but from what I could find thefollow services can be provided by the Samba daemon: s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, ntp_signd, kcc, dnsupdate, dns, smb, nmb, winbind. The default for this parameter is: server services = s3fs rpc nbt wrepl ldap cldap kdc drepl winbind ntp_signd kcc dnsupdate dns. Services can be added/remove from the default by a +/- and the service to add/remove. Example − server services = -s3fs (remove) +smb (add). Note that the smb, nmb, and windbind services are services equivalent to the older, Samba 3, type services (stand alone daemons). Of specific interest to SME 9 may be the use of the nmb service for WINS support. As we begin testing we may need to enable this service and possibly smb for simple share access. − − '''Server Role:''' Samba 4 currently only supports the active directory domain controller server role. For now, we'll force Samba config into DC server role, but provide a fragment for expansion later. There is a long explanation behind this, but for now, restriction doesn't hurt us. SME as a DC will provide auth for both domain membership and simple shares by either joining the domain or logging into the server every time. − − ===/etc/raddb/radius.conf=== − Need to check and/or modify the following existing fragments: − − etc/raddb/radiusd.conf/25modules30smbpasswd: # An example configuration for using /etc/samba/smbpasswd. − etc/raddb/radiusd.conf/25modules30smbpasswd:} passwd smbpasswd \{ − etc/raddb/radiusd.conf/25modules30smbpasswd: filename = /etc/samba/smbpasswd − etc/raddb/radiusd.conf/25modules25mschap: # reading from /etc/smbpasswd. − etc/raddb/radiusd.conf/25modules25mschap: # If you are using /etc/smbpasswd, see the 'passwd' − etc/raddb/radiusd.conf/25modules25mschap: # module for an example of how to use /etc/smbpasswd − etc/raddb/radiusd.conf/65authorization40default: # If you are using /etc/smbpasswd, and are also doing − etc/raddb/radiusd.conf/65authorization40default: # configure the 'smbpasswd' module, above. − etc/raddb/radiusd.conf/65authorization40default: ( $ldap{Authentication} || 'disabled' ) eq 'enabled' ? 'ldap' : 'smbpasswd'; − − ===/etc/krb5.conf=== − Create based new template fragments for this configuration file − − ==Configuration Database Parameters== − Default key and property values: − − {| class="wikitable" − |- − ! Database name !! Unique key !! Property name !! Default value || Possible values || Description − |- − | configuration ||style="text-align:center;"| SMBD || ||style="text-align:center;"|'''DELETE'''|| || Delete this key. Replaced by other keys − |- − | ||style="text-align:center;"| NMBD || ||style="text-align:center;"|'''DELETE'''|| || Delete this key. Replaced by other keys − |- − | ||style="text-align:center;"| SMB || ||style="text-align:center;"|'''service'''|| || Existing SMB key properties changes − |- − | ||style="text-align:center;"| || UnixCharSet ||style="text-align:center;"|'''DELETE'''|| || Delete this property − |- − | ||style="text-align:center;"| ||workgroup || style="text-align:center;"|'''sme-server''' || User defined|| − |- − | ||style="text-align:center;"| ||ServerString || style="text-align:center;"|'''SME Server''' || User defined|| − |- − | ||style="text-align:center;"| ||ServerRole || style="text-align:center;"|'''DC''' || SA / BD / DC|| Stand Alone, Backup Domain or Domain Controller − − |- − | ||style="text-align:center;"| ||OpLocks || style="text-align:center;"|'''enabled''' || enabled / disabled|| − |- − | ||style="text-align:center;"| ||KernelOplocks || style="text-align:center;"|'''enabled''' || enabled / disabled|| − − |- − | ||style="text-align:center;"| ||Level2Oplocks || style="text-align:center;"|'''enabled''' || enabled / disabled|| − − |- − − | ||style="text-align:center;"| ||AllowDNSUpdates || style="text-align:center;"|'''nonsecure''' |||| − − |- − | ||style="text-align:center;"| ||DNSForwarder || style="text-align:center;"|'''TBA''' |||| − |} − − − The ''DNSForwarder'' property is a new property that could be defined to forward DNS requests from the Samba DNS to another DNS. − − − *'''''Others (optional)''''': These parameters are meant to take smb.conf inputs as defined the man pages. Defaults for these parameters are the same as the corresponding defaults in the smb.conf man page. Template fragments feed these parameters into the smb.conf file with minimal syntax checking, as it is assumed those who manually input them know what they are doing. − − − {| class="wikitable" − |- − ! Database name !! Unique key !! Property name !! Default value || Possible values || Description − |- − | configuration ||style="text-align:center;"| SMB ||||style="text-align:center;"| || || − |- − | ||style="text-align:center;"| ||NameResolver||style="text-align:center;"|'''TBA'''|| || The order in which name resolution will take place by the Samba daemon − |- − | ||style="text-align:center;"| ||ServerServices||style="text-align:center;"|'''TBA'''|| || See the server services discussion detailed under smb.conf section − |- − | ||style="text-align:center;"| ||SMBPorts||style="text-align:center;"|'''TBA'''|| || − |- − | ||style="text-align:center;"| ||SocketOptions||style="text-align:center;"|'''TBA'''|| || − |- − | ||style="text-align:center;"| ||WideLinks||style="text-align:center;"|'''TBA'''|| || − |- − | ||style="text-align:center;"| ||GuestAccount||style="text-align:center;"|'''TBA'''|| || − |- − | ||style="text-align:center;"| ||GuestOK||style="text-align:center;"|'''no'''||yes / no || − |- − | ||style="text-align:center;"| ||LogonDrive||style="text-align:center;"|'''TBA'''|| ||Drive letter to be used to the login drive when users login to a domain − |- − | ||style="text-align:center;"| ||RoamingProfiles||style="text-align:center;"|'''no'''||yes / no || − |- − | ||style="text-align:center;"| ||LogonPath||style="text-align:center;"|'''TBA'''|| || − |- − | ||style="text-align:center;"| ||BindInterfacesOnly||style="textalign:center;"|'''no'''||yes / no || − |- − | ||style="text-align:center;"| ||CaseSensitive||style="text-align:center;"|'''yes'''||yes / no || − |- − | ||style="text-align:center;"| ||MaxLogSize||style="text-align:center;"|'''50'''||User defined ||Samba log size in kilobytes. Default set to 50 − |} − − − '''KRB5''' : Create new configuration dbase entry for Kerberos service in Samba − − {| class="wikitable" − |- − ! Database name !! Unique key !! Property name !! Default value || Possible values || Description − |- − | configuration ||style="text-align:center;"| Kerberos ||||style="text-align:center;"| || || − |- − | ||style="text-align:center;"| ||DefaultRealm||style="text-align:center;"|'''uninitialized'''|| || This parameter is built into a template fragment, but we will not define it at default. The template fragment will build the default realm by concatenating the SystemName and DomainName reordered elsewhere in the configuration dbase − |- − | ||style="text-align:center;"| ||DNSLookup||style="text-align:center;"|'''false'''|| true / false|| − − |- − | ||style="text-align:center;"| ||DNSLookupRealm||style="text-align:center;"|'''false'''|| true / false|| − − |- − | ||style="text-align:center;"| ||DNSLookupKDC||style="text-align:center;"|'''false'''|| true / false|| − − |- − |} − − ==Services to Modify== − − {| class="wikitable" − |- − ! Service name !! Type !! Action !! File !! Description − |- − | smbd || Existing − |- − | || || Remove ||/var/service/smbd || − |- − | || || Remove ||/services/smbd || − |- − | || || Remove ||/etc/rc.d/init.d/supervise/smb || − − |- − | || || Remove ||/etc/rc.d/rc7.d/S91smb || − |- − | || || Remove ||/etc/rc.d/init.d/smbd || − − |- − | nmbd || Existing − |- − | || || Remove ||/var/service/smbd || − − |- − | || || Remove ||/services/smbd || − − |- − | || || Remove ||/etc/rc.d/init.d/smbd || − |- − | smb || New || || ||I would have liked to have called this "Samba," but that would have meant changing alot of existing code that looks for "smb" − |- − | || || Create ||/var/service/smb || using smbd as a template. Samba 4 should be started with /usr/sbin/samba -D − |- − | || || Create symlink ||/service/smb -> /var/service/smb || − − |- − | || || Create symlink ||/etc/rc.d/init.d/smb -> /etc/rc.d/init.d/daemontools || − |- − | || || Create symlink ||/etc/rc.d/rc7.d/S91smb -> /etc/rc.d/init.d/e-smith-service || − |} − − ==DNS== − − Samba 4 includes an builtin DNS server that is required for proper operation of active directory. This internal DNS server is for AD functions only and does not provide caching DNS functions. − − SME Server 9.0 includes a caching DNS (djb dnscache) that listens for DNS requests on the LAN IP address and the localhost. This caching DNS then routes DNS requests for domains defined in the server-manager to tinyDNS and other requests to a resolving dns cache (djb dnscache.forwarder). − − One approach for DNS architecture with Samba 4 would have samba 4 primary dns requests to LAN clients, forwarding to the dnscache.forwarder service. The primary dnscache instance and tinydns would then be obsoleted. − − ==LDAP== − − Need to look at the LDAP authentication backend and mechanism on SME. On the surface, it looks like all of the Samba related LDAP code will be dropped and much of the standard authentication code will need to be converted to Active Directory auth. This task should include looking at openldap-proxy. − − ==Local and Samba Authentication== − #'''Local Authentication''': Samba 4 provides support for local authentication through PAM. This will need to be looked and and sorted out, especially as it relates to the previous LDAP authentication work. Consider replacing with SSSD. − #'''Updates to esmith::util perl module''': This perl module contains function for setting and modifying user passwords. We will need to redesign these functions to integrate with AD. Specific changes: − #*''setSambaPassword function'': This function needs to be completely re-written to set the Active directory password instead of the old samba password in smbpasswd − #*''cancelSambaPassword function'': Needs to be re-written for active directory instead of old smbpasswd file − #*''local password functions'': We need to look at these once we decide how we are going to handle local authentication on SME with Active directory. − #*''ldapPassword function'': Need to look at this and likely deprecate it, as we will likely set active directory passwords differently. − − ==Home directories and Homes Share== − Samba 4 changes the way Samba used to handle home directories. − # Samba 4 does not use the [homes] share with the [home] share. − # With respect to the [home] share, Samba 4 currently does not expand the %S variable in the smb.conf file due to a bug with Samba 4. Therefore, this will not work for us to share home directories: /home/e-smith/files/users/%S/home. Instead, we may be able to use this: '/home/%WORKGROUP%/%ACCOUNTNAME% and them link (symlink/hardlink) this to our current home directory structure so that we can share the home dirs via samba. − # We need to look at the "template homedir" configuration parameter in smb.conf and/or SSSD, as this may allow us to create home directories easier on a new user create event. − # The Samba active directory includes two attributes for home directories: homeDirectory (used by windows) and unixHomeDirectory(used by *nix). The current unixHomeDirectory attribute doesn't seem to be fully utilized by Samba. − − # Good thread on the topic: https://lists.samba.org/archive/samba/2014-January/178151.html − − ==Other Development Tasks to Research and Complete== − #'''Domain Server-Manager Panel''': A new Domain server-manager panel should be developed and the workgroup panel removed. Further discussion will need to take place to determine what needs to go into this new panel. This panel will likely be fairly simple, as much of the configuration parameters associated Samba Active directory will be incorporated into template fragments and database entries. − #'''User/Group Server-Manager Panels''': These panels will need to be looked at as they relate to template fragments, adjusting services, and updating database entries associated with Samba. − #'''Ibay Server-Manager Panel''': This panel will need to be looked at as it relates to template fragments, adjusting services, and updating database entries associated with Samba. − #'''Events/Actions'''': Existing events and actions related to samba will need to be reviewed and updated accordingly. A new event/action may need to be developed to provision a new Active Directory Domain using the Samba-Tool utility. − #'''e-smith-samba''': This package needs to be updated with development pieces detailed in this wiki page, for wider testing and development assistance. − − =Status= − − {| class="wikitable" − |- − |# − ! Task !! Status − |- − |1. − | Sernet Samba 4 package rebuild || style="text-align:center;" | <span style="color:green">'''DONE'''</span> − |- − |2. − | Create daemontools service for Samba 4 || style="text-align:center;" |<span style="color:green">'''DONE'''</span> − |- − |3. − | Re-Write smb.conf template fragments || style="text-align:center;" |<span style="color:green">'''DONE'''</span> − |- − |4. − | Create Kerberos template fragments || style="text-align:center;" |<span style="color:green">'''DONE'''</span> − |- − |5. − | Add/Modify SMB database entries || style="text-align:center;" |<span style="color:green">'''DONE'''</span> − |- − |6. − | Create krb5 configuration dbase key || style="text-align:center;" |<span style="color:green">'''DONE'''</span> − |- − |7. − | Re-configure init.d start-up/shutdown scripts || style="text-align:center;" |<span style="color:green">'''DONE'''</span> − |- − |8. − | Configure Samba DNS Service || style="text-align:center;" |<span style="color:green">'''DONE'''</span> − |- − |9. − | Configure DNS Cache Resolver || style="text-align:center;" |<span style="color:green">'''DONE'''</span> − |- − |10. − | Create Active Directory Provision/Re-Provision SME Event || style="text-align:center;" |<span style="color:green">'''DONE'''</span> − |- − |11. − | Add Active Directory Provisioning to Bootstrap-Console || style="text-align:center;" |<span style="color:green">'''DONE'''</span> − |- − |12. − | Reconfigure SME User Authentication for Active Directory|| style="text-align:center;" |<span style="color:orange">'''UNDERWAY'''</span> − |} − − =References= − # http://dev.nethserver.org/projects/nethserver/wiki/Samba4 (Thanks Filippo!)+ − # https://lists.samba.org/archive/samba/2014-April/180336.html − # https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO − # http://www.alexwyn.com/computer-tips/centos-samba4-active-directory-domain-controller − − − =Bugzilla references= + − + − + − + − + − =[http://wiki.contribs.org/SAMBA_4_-_Misc_Development_Topics]=+ + + + + + + + + + + + + + + − =[http://wiki.contribs.org/SAMBA_4_Active_Directory_Schema Samba 4 Active Directory Schema]=+ + + + + + + + + +
→Change Log / Release Notes
=Introduction=
=Introduction=
This wiki page will be used to track the integration effort of Samba 4 into SME 9+
This wiki page will be used to track the integration effort of Samba 4 into SME 9+
Lead developer: [[User:Gzartman|Gzartman]]
Lead developer: [[User:Gzartman|Gzartman]]
=Overview and Objectives=
=Overview and Objectives=
The primary objective of this effort is to create Active Directory support on SME 9+ with a focus on simplicity and easy in integration, as is done on many of the other sub-systems on SME Server. Other distributions with Samba 4 support take the approach of providing a fairly complex front end to Samba 4 with many configuration parameters and options. Our approach for Samba 4 is to stream line implementation to provide a straight forward and simple set of UI parameters for the administrator to deploy Active Directory in a configuration that will work in most deployments. Support for the full array of Samba 4 options is provided under the hood in SME Server, but will be available primary from the console. The SME Server community may decide to create an Advanced Samba server-manager panel to control and configure some of the more advanced features available in Samba 4, but the Core SME Server deployment of Active Directory will remain focused on simplicity.
The primary objective of this effort is to create Active Directory support on SME 9+ with a focus on simplicity and easy integration, as is done on many of the other sub-systems on SME Server. Other distributions with Samba 4 support take the approach of providing a fairly complex front end to Samba 4 with many configuration parameters and options. Our approach for Samba 4 is to stream line implementation to provide a straight forward and simple set of UI parameters for the administrator to deploy Active Directory in a configuration that will work in most deployments. Support for the full array of Samba 4 options is provided under the hood in SME Server, but will be available primary from the console. The SME Server community may decide to create an Advanced Samba server-manager panel to control and configure some of the more advanced features available in Samba 4, but the Core SME Server deployment of Active Directory will remain focused on simplicity.
Deployment of Samba 4 on SME Server means that many of the authentication mechanisms on SME Server need to change to integrate with Active Directory, therefore this development effort is quite far reaching.
Deployment of Samba 4 on SME Server means that many of the authentication mechanisms on SME Server need to change to integrate with Active Directory, therefore this development effort is quite far reaching.
Samba 4 on SME Server is targeted for Koozali SME Server 10
Samba 4 on SME Server is targeted for Koozali SME Server 10, but is currently be developed simultaneously on both version 9.2 and 10.
=Current Status=
=Current Status=
Current Release: Alpha 5
'''Current Release:''' Alpha 7
Samba 4 on SME Server will be provided by way of the package smeserver-samba, which will upgrade and obsolete e-smith-samba. The current release of Samba 4 on SME Server is available here: [http://www.leiengineering.com/repository/smeserver/Packages/SME_Server_Samba4/ SME Server Samba 4 Packages]
Samba 4 on SME Server will be provided by way of the package smeserver-samba, which will upgrade and obsolete e-smith-samba. The current release of Samba 4 on SME Server is available here: [http://www.leiengineering.com/repository/smeserver/Packages/Samba4_Alpha7/ SME Server Samba 4 Packages]
These packages are currently not provided by the Koozali buildsys because there is still a fair bit of work to do to integrate this code with existing SME services. Since Samba 4 on SME Server includes many other sub-systems, inclusion of the Samba 4 code is not being including in current development streams until the code is closer to release so as not to hold up other development activities. However, this code is available in CVS.
These packages are currently not provided by the Koozali buildsys because there is still a fair bit of work to do to integrate this code with existing SME services. Since Samba 4 on SME Server includes many other sub-systems, inclusion of the Samba 4 code is not being including in current development streams until the code is closer to release so as not to hold up other development activities. However, this code is available in CVS.
<br>
=Samba 4 Packages=
=Samba 4 Packages=
Upstream Centos 6 does not provide Samba 4 packages with full Active Directory support but they are provided in current Centos 7. The reason Samba + AD packages are not available on Centos 6 is is detailed [https://blog.cryptomilk.org/2014/07/09/samba-ad-dc-in-fedora-and-rhel/ here]. A solution to provide Samba 4 active directory does not look to be forthcoming by viewing Samba status in the Fedora project.
Upstream Centos 6 and 7 do not provide Samba 4 packages with full Active Directory support. This is because Samba 4 Kerberos is based upon Heimdal Kerberos whereas the upstream vendor uses MIT Kerberos. Heimdal Kerberos and MIT Kerberos are not compatible with one another and so the upstream vendor has decided to disable Kerberos support in Samba until such time as Samba supports MIT Kerberos. Details can be found here https://wiki.samba.org/index.php/MIT_Build
and here https://blog.cryptomilk.org/2014/07/09/samba-ad-dc-in-fedora-and-rhel/
To further development of support for Samba 4 on the Koozali SME Server, Samba 4 packages from Sernet were selected. These packages will not immediately install cleaning on SME 9 due to the customization of Centos associated with SME 9, so the Sernet packages where re-built for SME 9. Details of this rebuild along with a link to the rebuilt packages are located in [[bugzilla:8075]]. After rebuilding, these packages do install cleanly but the services will not start using the init.d scripts provided with the packaged due to changes made during the re-build of the packages for SME 9.
To provide Active Directory support, the Koozali devteam has decided to fork the upstream Samba 4 package and re-compile with Heimdal Kerberos support on Koozali SME Server 10. Details of this rebuild are located in [[bugzilla:9751]]. Support for Active Directory on SME 9 can be provided by Sernet Samba 4.2 packages, which are the last set of open source Sernet packages. However, the devteam is currently focusing development effort on SME 10.
=Installation=
=Installation=
RPMs for this release can be found here: [http://www.leiengineering.com/repository/smeserver/Packages/SME_Server_Samba4/ SME Server Samba 4 Packages]
RPMs for this release can be found here: [https://www.leiengineering.com/repository/smeserver/Packages/Samba4_Alpha7/ SME Server Samba 4 Packages]
Install Instructions:
Install Instructions:
# signal-event post-upgrade; signal-event reboot
# signal-event post-upgrade; signal-event reboot
# Once the server comes back up, provision the domain with: signal-event provision-domain-controller admin_password
# Once the server comes back up, provision the domain with: signal-event provision-domain-controller admin_password
Note: You can create users using the Server-Manager, but you will receive and error message because this alpha does not yet include full server-manager support. However, the user will be created in the Active Directory.
Note: The password utilities in the server-manager are not yet working. We will be working to include SSSD in the next alpha and then all password utilities and functions will work as expected.
=Change Log / Release Notes=
=Change Log / Release Notes=
==Alpha 7==
* Implementation of Samba 4 on SME 10.
* Drop bootstrap-console patch for e-smith-base for provisioning samba 4 from the console. We'll add this back in later
==Alpha 6==
* Final alpha on SME 9. Going forward, this code will be moved to the SME 10 alpha release for ongoing development and testing
* Change the way we are naming alpha package versions because it is becoming difficult to apply alpha level changes with patch files. Each alpha release will have its own source archive. Source archive (.tar.xz) file version numbers will track with the alpha release number.
* Rewrite server-manager user accounts panel for AD integration, except for the Reset Password link. We won't be able to update this function until we deploy SSSD, which will come in the next release
* Move smb.conf and AD schema extension fragments to /etc/samba
* Extend AD schema to include the attributes: lockable, removable, and emailForward
* Change the koozliUser objectClass to smeExtended for extended schema attributes
* Get rid of the user-create-AD action because we don't have enough control over the user create process in a server-manager panel using an action. Instead, we added the esmith::util::createADUser() function that sets up a basic Active Directory user. This function is somewhat analogous to the useradd utility
* Drop "Legacy Mode," which was part of the user-create-AD action
* Replace user-create event with user-initialize
* Add user-create-profiledir and user-create-home actions as part of the user-intialize event, since the useradd utility used to do this
* Update user-modify, user-delete, user-lock events for AD integration
* Create user-AD-enable and user-AD-disable actions
* Extensive clean-up of smb.conf fragments now that we have a working Samba 4 deployment, including default configuration dbase parameters. This clean-up and enhancement results in a very clean smb.conf file
* Update qmail and .qmail template fragments and configuration to pull user data from the Active Directory. Spam and filtering fragments have been excluded because we have not yet decided how to handle these configuration in the Active Directory
* Further enhancement and refinement to esmith::AD
==Alpha 5==
==Alpha 5==
==Alpha 1==
==Alpha 1==
* Roll new smeserver alpha package for Samba4 [SME:8075]
* Roll new smeserver alpha package for Samba4 [SME:8075]
<br>
=General Development Notes=
=Bugzilla references=
'''[[bugzilla:4667]]''' <br>
'''[[bugzilla:8075]]''' Adding Samba 4<br>
'''[[bugzilla:8075]]''' Adding Samba 4<br>
'''[[bugzilla:8632]]''' Remove smb.conf template fragments from e-smith-LPRng-2.4.0-1<br>
'''[[bugzilla:8638]]''' Modify e-smith-dnscache for Samba 4 support<br>
'''[[bugzilla:8638]]''' Modify e-smith-dnscache for Samba 4 support<br>
'''[[bugzilla:8660]]''' User account authentication with Active Directory and AccountsDB<br>
'''[[bugzilla:8660]]''' User account authentication with Active Directory and AccountsDB<br>
'''[[bugzilla:8663]]''' Proftpd and active directory authentication (Samba 4)<br>
'''[[bugzilla:8663]]''' Proftpd and active directory authentication (Samba 4)<br>
'''[[bugzilla:8665]]''' esmith::AD perl module for interacting with Active Directory<br>
'''[[bugzilla:8665]]''' esmith::AD perl module for interacting with Active Directory<br>
'''[[bugzilla:8667]]''' Get rid of PPTP when we upgrade to Samba 4<br>
'''[[bugzilla:8668]]''' Get rid of PPTP when we upgrade to Samba 4<br>
'''[[bugzilla:8670]]''' Qmail updates for Samba 4<br>
'''[[bugzilla:8670]]''' Qmail updates for Samba 4<br>
'''[[bugzilla:8674]]''' Remove smbpasswd and WINS pieces for Samba 4<br>
'''[[bugzilla:8674]]''' Remove smbpasswd and WINS pieces for Samba 4<br>
'''[[bugzilla:8675]]''' e-smith-LDAP + Samba 4<br>
'''[[bugzilla:8675]]''' e-smith-LDAP + Samba 4<br>
'''[[bugzilla:8687]]''' Add SSSD daemon for Samba 4 local authentication<br>
'''[[bugzilla:8687]]''' Add SSSD daemon for Samba 4 local authentication<br>
'''[[bugzilla:8703]]''' Samba 4: Home directory
'''[[bugzilla:8703]]''' Samba 4: Home directory<br>
<br><br>
'''[[bugzilla:9651]]''' Remove Samba Parts from esmith::Util for Samba 4 <br>
'''[[bugzilla:9653]]''' Pseudonyms handling with Active Directory<br>
'''[[bugzilla:9662]]''' System Initialization and Re-Configuration with Active Directory<br>
'''[[bugzilla:9700]]''' Consider removing /sbin/e-smith/samba_check_password <br>
'''[[bugzilla:9708]]''' Evaluate registry fragments in server-resources for Samba 4<br>
'''[[bugzilla:9711]]''' Include dnscache and tinydns config in smeserver-samba for Samba 4 DNS queries<br>
'''[[bugzilla:9712]]''' Reconfigure shadowcopy for Samba 4<br>
'''[[bugzilla:9713]]''' Reconfigure recycle bin for Samba 4<br>
'''[[bugzilla:9715]]''' Modify e-smith-dnscache to allow connections from entire loopback network<br>
'''[[bugzilla:9755]]''' Re-Write Users Panel for AD integration<br>
'''[[bugzilla:9799]]''' Update esmith::util::chown for Samba users<br>
'''[[bugzilla:9800]]''' Update e-smith-quota to process quotas for active directory users<br>
'''[[bugzilla:9802]]''' Modify user events/actions and server-manager panel<br>
'''[[bugzilla:9804]]''' Update password functions in esmith::util for Samba 4<br>
'''[[bugzilla:9806]]''' e-smith-openssh modifications for Samba 4<br>
'''[[bugzilla:9807]]''' smeserver-qpsmtpd changes for Samba 4<br>
<br>
=Active Directory Schema=
=Active Directory Schema=
Following is a direct dump of the active directory from a freshly provisioned SME Server domain. The DNS/Kerberos domain is domain.com, the hostname is virgin, and the windows domain is sme-server. The ipaddress for this test machine is 192.168.0.67. These data is quite long, but I found it very useful; as it is extremely difficult to find these attributes in any documentation about Samba 4 and ADDC:
Following is a direct dump of the active directory from a freshly provisioned SME Server domain. The DNS/Kerberos domain is domain.com, the hostname is virgin, and the windows domain is sme-server. The ipaddress for this test machine is 192.168.0.67. These data is quite long, but I found it very useful; as it is extremely difficult to find these attributes in any documentation about Samba 4 and ADDC:
[http://wiki.contribs.org/SAMBA_4_Active_Directory_Schema Samba 4 Active Directory Schema]
=[http://wiki.contribs.org/SAMBA_4_-_Misc_Development_Topics Misc Development Topics]=
=References=
# http://dev.nethserver.org/projects/nethserver/wiki/Samba4 (Thanks Filippo!)
# https://lists.samba.org/archive/samba/2014-April/180336.html
# https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO
# http://www.alexwyn.com/computer-tips/centos-samba4-active-directory-domain-controller
[[Category:Core Development]]
[[Category:Core Development]]